Headphone amplifiers & portable DACs

Price

• CHF49.00 - CHF14,999.00

Availability

•  In stock (17)
•  Available (97)

Brand

•  Astell&Kern (5)
•  Aune (5)
•  Burson audio (8)
•  FiiO (19)
•  Focal (1)
•  Gold Note (3)
•  Hifiman (9)
•  iBasso (6)
•  iFi Audio (22)
•  Luxsin (2)
•  Moon by Simaudio (3)
•  Naim (1)
•  Pro-ject (2)
•  Rotel (2)
•  Shanling (7)
•  Unison Research (1)
•  Vincent Audio (1)

Color

• Gray (12)
• Red (2)
• Blue (3)
• Gold (3)
• Black (24)
• Silver (10)

Bluetooth

•  5.0 (1)
•  aptX HD and AAC (2)
•  Bluetooth 5.0 reception on a Qualcomm QCC5124 chip with SBC, AAC, aptX, aptX LL, aptX HD, aptX Adaptive and LDAC (1)
•  Bluetooth 5.1 (QCC5124 chip): LDAC, aptX Adaptive, aptX HD, aptX, aptX LL, AAC, SBC (1)
•  Bluetooth 5.1 (QCC5125): LDAC, aptX Adaptive, aptX HD, aptX LL, aptX, AAC, SBC (1)
•  Bluetooth 5.1 reception: SBC, AAC, aptX, aptX LL, aptX HD, aptX Adaptive and LDAC (1)
•  Bluetooth 5.1 with SBC, AAC, aptX, aptX LL, aptX HD, aptX Adaptive and LDAC, up to 96kHz wirelessly (1)
•  Bluetooth 5.2 (1)
•  Bluetooth 5.2 (Qualcomm QCC5141): aptX Adaptive, aptX, aptX Voice, AAC, SBC, Snapdragon Sound (1)
•  Bluetooth 5.2 with SBC, AAC, aptX, aptX Adaptive, LHDC and LDAC, range of about 10m, simultaneous dual connection (1)
•  Bluetooth 5.4 (3)
•  Bluetooth 5.4 (Qualcomm QCC5181): LDAC, aptX Adaptive, aptX Lossless, aptX HD, aptX, AAC, SBC, Bluetooth LE Audio, Snapdragon Sound (1)
•  Bluetooth 5.4: LDAC, AAC, and SBC support (1)

Battery life

•  6 hours (1)
•  7h (35h avec boitier) (1)
•  Batterie 20000mAh (1)
•  env. 10h (450mAh) (1)
•  Over 8 hours per earpiece in AAC, two full recharges from the case, earpieces charge in under 2h and the case in under 1h30 (1)

Wireless connectivity

•  LDAC, aptX Adaptive, aptX, AAC, SBC (1)
•  LDAC, aptX Adaptive, aptX HD, aptX, AAC, SBC (1)
•  True wireless with 3rd-generation TWS Mirroring, simultaneous dual connection, 32 volume levels, 10-band parametric equalizer, large touch button, appsFiiOControl / Music (1)

Hi-Res Audio

•  384 kHz/32-bit, DSD256 (1)
•  384 kHz/32-bit PCM, DSD256 (1)
•  Hi-Res Audio certified, signal-to-noise ratio greater than 120 dB (A-weighted) (1)
•  IPX4 Water Resistance (1)
•  Up to 96kHz at 24-bit wirelessly via Snapdragon Sound, frequency response from 20Hz to 40kHz within 3dB, distortion under 0.0018% (1)
•  Up to 384 kHz at 32-bit and DSD256, distortion under 0.0006 % into 32 ohms, Hi-Res Audio certified (2)
•  Up to 384kHz at 32-bit and DSD256 over USB, 192kHz/24-bit coaxial, 96kHz/24-bit optical, MQA rendering; distortion under 0.0003%; Hi-Res Audio and Hi-Res Wireless certified (1)
•  Up to 384kHz at 32-bit and DSD256 over USB, 192kHz/24-bit coaxial and 96kHz/24-bit optical; distortion under 0.0003%; Hi-Res Audio certified by the Japan Audio Society (1)
•  Up to 384kHz at 32-bit and DSD256 over USB, full MQA decoding up to 384kHz; 122dB signal-to-noise ratio, distortion under 0.0008%; Hi-Res Audio and Hi-Res Audio Wireless certified (1)
•  Up to 768kHz at 32-bit and native asynchronous DSD512, full MQA decoding; 124dB signal-to-noise ratio, distortion under 0.0004% (1)
•  USB decoding up to 384 kHz/32-bit and DSD256, NOS/OS modes (384 kHz oversampling), full MQA support, signal-to-noise ratio up to 118 dB (1)
•  USB decoding up to 384 kHz/32-bit and DSD256, NOS/OS modes (384 kHz oversampling), signal-to-noise ratio up to 115 dB (1)
•  USB decoding up to 768 kHz/32-bit and native DSD512, full MQA support, signal-to-noise ratio up to 125 dB (1)
•  USB decoding up to 768 kHz/32-bit and native DSD512, full MQA support, signal-to-noise ratio up to 126 dB (1)
•  USB up to 768 kHz at 32-bit, DSD64, DSD128 and DSD256; SPDIF output up to 384 kHz (1)
•  USB up to 768 kHz at 32-bit and native DSD512, full MQA decoding, streaming up to 384 kHz at 32-bit and DSD256 (1)

Headphone output

•  3.5 mm (1)
•  3.5 mm (SE/SPDIF) and 4.4 mm balanced (1)
•  3.5 mm and 4.4 mm (3)
•  3.5 mm single-ended headphone output (2)
•  3.5 mm single-ended output doubling as SPDIF, and 4.4 mm balanced output; impedances of 16 to 150 ohms and 16 to 300 ohms (1)
•  3.5 mm unbalanced and 4.4 mm balanced headphone outputs (1)
•  3.5mm S-Balanced (1)
•  4.4 mm (1)
•  4.4 mm (symmetrical) and 6.35 mm (1)
•  4.4mm symetrique, 3.5mm S-Balanced (2)
•  4.4mm symetrique, 6.35mm SE (1)
•  6.35 mm and 3.5 mm unbalanced headphone outputs; 4.4 mm and XLR4 balanced outputs (1)
•  6.35 mm and 4.4 mm symmetrical (1)
•  6.35 mm asymmetric and 4.4 mm symmetric headphone outputs (2)
•  6.35 mm unbalanced and 4.4 mm balanced headphone outputs, two hardware gain levels (1)
•  Balanced 4.4 mm and XLR4 outputs, plus a single-ended output; five gain levels, impedances of 8 to 150 ohms and 8 to 350 ohms (1)
•  Front-panel headphone outputs: balanced 4-pin XLR, balanced 4.4mm and unbalanced 6.35mm; recommended headphone impedance from 16 to 600 ohms (1)
•  MMCX connectors for detachable earpieces, adaptive impedance from 8 to 100 ohms, 32-step volume, channel balance over 12 steps of 0.5dB (1)
•  Unbalanced 3.5mm and balanced 4.4mm headphone outputs; two-level gain, global parametric equaliser (1)
•  Unbalanced 3.5mm headphone output that doubles as an S/PDIF digital output up to 96kHz/24-bit, plus a balanced 4.4mm output; 120-step volume, low/high gain or desktop mode (1)
•  Unbalanced 6.35mm and balanced 4.4mm headphone outputs, 6.35-to-3.5mm adapter included; two-level gain, 112-step volume, recommended headphone impedance from 16 to 300 ohms (1)

Integrated DAC

•  32-bit ESS (1)
•  AKM AK4191 + dual AK4499EX (one per channel), XMOS XU316 USB decoding (1)
•  Burr Brown PCM1795 (1)
•  Cirrus Logic CS43131 converter and SGM8262 operational amplifier, immersion-gold circuit board, palladium-plated oxygen-free copper conductors (2)
•  Cirrus Logic CS43131 × 2 (1)
•  Cirrus Logic CS43198 (1)
•  Dual AK4493SEQ (one converter per channel) (1)
•  Dual ES9069Q (4th-generation 32-bit HyperStream architecture), XMOS XU316 USB decoding (1)
•  Eight-channel ESS Sabre ES9027SPRO converter with two OPA1692 op-amps, four Texas Instruments INA1620 stages and a XMOS XU316 USB interface (1)
•  ESS (1)
•  ESS SABRE ES9028PRO 32-bit (1)
•  Per-channel AKM AK4332 converter with built-in headphone amplifier and dual-core Kalimba Qualcomm QCC5141 Bluetooth chip (1)
•  Proprietary 4-channel, fully differential, 24-bit R2R DAC (FiiO) (192 thin-film resistors, 0.1%, 30 ppm), SA9312L USB decoding (1)
•  Proprietary FiiO 4-channel, fully differential, 24-bit R2R DAC (192 thin-film resistors, 0.1%, 30 ppm), XMOS XU316 USB interface (1)
•  Standalone AK4332 DAC (up to 96 kHz/24-bit wireless, 192 kHz/24-bit in PEQ mode) (1)
•  Two AKM AK4493SEQ converters and two THX AAA 788+ amplification modules, XMOS XUF208 USB interface, external 12V/2A power supply (1)
•  Two AKM AK4497S, X2000 controller, XU316 USB stage, class-AB amplification with discrete MJE243G and MJE253G transistors (1)
•  Two Cirrus Logic CS43198 converters, one per channel (1)
•  Two ESS ES9038PRO converters and two THX AAA 788+ amplification modules, XMOS XUF208 USB interface, linear power supply with four 4700µF capacitors (1)
•  Two ESS ES9219MQ converters, a dual-core Qualcomm QCC5125 Bluetooth chip and a XMOS XU316 USB interface (1)
•  Yes (5)