• New
FiiO QX13 in Geneva | Digistore.ch
FiiO QX13 in Geneva | Digistore.ch
FiiO QX13 in Geneva | Digistore.ch
FiiO QX13 in Geneva | Digistore.ch
FiiO QX13 in Geneva | Digistore.ch
    FiiO QX13 in Geneva | Digistore.ch
    FiiO QX13 in Geneva | Digistore.ch
    FiiO QX13 in Geneva | Digistore.ch
    FiiO QX13 in Geneva | Digistore.ch
    FiiO QX13 in Geneva | Digistore.ch

FiiO QX13 | Portable headphone DAC and amplifier

72615
CHF229.00 Tax included
Supplier stock – typically 4 to 7 days
FiiO QX13 portable DAC with an ES9027SPRO and a 1.99-inch screen. 3.5 and 4.4 mm outputs, 900 mW into 32 ohms in desktop mode, 768 kHz and DSD512.
Quantity
Add to wishlist
Supplier lead time, usually between 4 and 7 days

The FiiO QX13 with its screen lit

An ES9027SPRO

Conversion rests on an ESS ES9027SPRO, preceded by an XU316 USB stage. Amplification falls to four INA1620. The unit accepts up to 768 kHz at 32-bit and native DSD512.

3.5 and 4.4 mm headphone outputs of the QX13

Nine hundred milliwatts

In desktop mode at high gain, the 4.4 mm balanced output delivers 900 milliwatts per channel into 32 ohms and 125 milliwatts into 300 ohms. The 3.5 mm output reaches 310 milliwatts into 32 ohms. Outside desktop mode the same outputs give 605 and 250 milliwatts.

The desktop-mode switch on the side of the unit

A hundred and twenty-four decibels

The stated signal-to-noise ratio reaches 124 dB on both outputs, for distortion of 0.0004 % single-ended. Accepted impedances run from 8 to 350 ohms. The 3.5 mm socket doubles as a coaxial output up to 96 kHz.

1.99-inch screen showing the current sampling rate

A 1.99-inch screen

The 1.99-inch LCD shows 170 x 320 pixels and rotates with orientation. A ten-band dynamic equaliser works over plus or minus 12 dB, with eight presets and custom curves. The shell measures 64.2 x 30.7 x 13 mm, at 33.7 grams in carbon fibre or 39.2 grams in aluminium.

72615

Data sheet

Product Type
Portable DAC and headphone amplifier with a carbon-fibre body and colour screen
Integrated DAC
Eight-channel ESS Sabre ES9027SPRO converter with two OPA1692 op-amps, four Texas Instruments INA1620 stages and a XMOS XU316 USB interface
Headphone output
Unbalanced 3.5mm headphone output that doubles as an S/PDIF digital output up to 96kHz/24-bit, plus a balanced 4.4mm output; 120-step volume, low/high gain or desktop mode
Output power
Desktop mode: 310mW per channel into 32 ohms unbalanced and 900mW balanced; outside desktop mode: 250mW unbalanced and 570mW balanced; output impedance under 1 ohm unbalanced
Connectivity
USB-C port for data and power, second auxiliary USB-C port for the patented desktop mode, UAC 1.0 mode compatible with Switch and PS5, 1.99-inch IPS screen at 170x320 pixels, 10-band parametric equaliser
Hi-Res Audio
Up to 768kHz at 32-bit and native asynchronous DSD512, full MQA decoding; 124dB signal-to-noise ratio, distortion under 0.0004%
Series
QX
Width
6.4 cm
Depth
3.1 cm
Height
1.3 cm
Unit weight
0.0337 kg

Specific References

EAN13
6953175750130
New

Complete your headphone amp

This website uses cookies to ensure you get the best experience on our website