The Amina Firehood 345 is an intumescent Kevlar fire hood for Amina invisible loudspeakers in the 345 × 450 mm format, recessed into ceilings or cavity walls. It is designed for a 60-minute fire rating and adds acoustic insulation.
The Amina Firehood 300 is an intumescent Kevlar fire hood for Amina invisible loudspeakers in the 300 × 400 mm format, recessed into ceilings or cavity walls. It is designed for a 60-minute fire rating and adds acoustic insulation.
The Amina Firehood 200 is an intumescent Kevlar fire hood for Amina invisible loudspeakers in the 200 × 450 mm format, recessed into ceilings or cavity walls. It is designed for a 60-minute fire rating and adds acoustic insulation.
The Amina Backbox SW345 is a stainless steel back box for Amina invisible loudspeakers in the 345 × 450 mm format, in masonry walls or ceilings. Its removable alignment trim marks the speaker level during rendering.
The Amina Backbox SW300 is a stainless steel back box for Amina invisible loudspeakers in the 300 × 400 mm format, in masonry walls or ceilings. Its removable alignment trim marks the speaker level during rendering.
The Amina Backbox SW200 is a stainless steel back box for Amina invisible loudspeakers in the 200 × 450 mm format, in masonry walls or ceilings. Its removable alignment trim marks the speaker level during rendering.
The Amina Backbox CV345 is an aluminium back box for Amina invisible loudspeakers in the 345 × 450 mm format, in plasterboard walls or ceilings. It aligns the speaker before plastering and cuts rearward sound by 26 dB on average.
The Amina Backbox CV300 is an aluminium back box for Amina invisible loudspeakers in the 300 × 400 mm format, in plasterboard walls or ceilings. It aligns the speaker before plastering and cuts rearward sound by 26 dB on average.
The Amina Backbox CV200 is an aluminium back box for Amina invisible loudspeakers in the 200 × 450 mm format, in plasterboard walls or ceilings. It aligns the speaker before plastering and cuts rearward sound by 26 dB on average.
The Amina ALF100CV is a passive bandpass subwoofer for wall and ceiling cavities, cabinetry or the space under a sofa. It reaches down to 28 Hz from 200 W into 4 Ω, with 109 dB maximum.
The Amina ALF100SM is a passive subwoofer that fits between the studs of a wall or ceiling and disappears under the plaster. It reaches down to 30 Hz and 110 dB at 1 m from 200 W into 4 Ω.
The Amina Guardian16 is a sixteen-channel active protection unit for Amina invisible speakers in a 19-inch 1U rack format. Each channel is set by dip-switch and handles up to 275 W of amplifier power.
The Amina Guardian8 is a eight-channel active protection unit for Amina invisible speakers in a 19-inch 1U rack format. Each channel is set by dip-switch and handles up to 275 W of amplifier power.
The Amina Guardian2 AGP7 is a two-channel active protection unit, factory preset for Mobius7i, Edge7i and Sapphire375. It handles up to 275 W per channel and runs on 5 V via micro-USB.
The Amina Guardian2 AGP5 is a two-channel active protection unit, factory preset for Mobius5i, Mobius5i/S200, Edge5i, Sapphire250 and Sapphire130iB. It handles up to 275 W per channel and runs on 5 V via micro-USB.
The Amina Guardian2 AGP3 is a two-channel active protection unit, factory preset for Mobius3i, Mobius Duali and Edge3i. It handles up to 275 W per channel and runs on 5 V via micro-USB.
The Amina Guardian2 X is a two-channel active protection unit for Amina invisible speakers, set by dip-switch to match the speaker it protects. It sits next to the amplifier and handles up to 275 W per channel.
The Amina Edge 7i is an invisible speaker for plasterboard, plastered up to its edges and painted with the wall, sold individually. Top of the Edge series, it reaches deeper into the bass.
The Amina Edge 5i is an invisible speaker for plasterboard, plastered up to its edges and painted with the wall, sold individually. It is designed for medium-power distributed audio and multi-channel surround.
The Amina Edge 3i is an invisible speaker for plasterboard, plastered up to its edges and painted with the wall, sold individually. The most compact Edge fits between closely spaced studs, in small rooms and corridors.
This website uses cookies to ensure you get the best experience on our website
Français
Deutsch
Italiano
