There are 23 products.
The compact Void Acoustics Inca 500 amplifier delivers 4 x 125 W into 4/8 Ω or 2 x 250 W at 70/100 V. Its matrix DSP is set up over Ethernet or Wi-Fi.
The Void Acoustics Bias Q5 power amplifier combines four class D channels and a built-in DSP in a 1U rack chassis. It delivers 1600 W per channel into 8 Ω and 3000 W per channel into 4 Ω.
The Void Acoustics BIAS Q3 power amplifier delivers 1400 W per channel into 8 Ω on four channels, with built-in DSP and a 4.3-inch touchscreen. It is controlled from the front panel or with ArmoníaPlus software, in a 2U rack format.
The Void Acoustics BIAS Q2+ is a 4-channel class D power amplifier delivering 1200 W per channel into 8 Ω. Its built-in DSP is controlled with ArmoníaPlus, in a 1U rack chassis.
The Void Acoustics Bias Q1.5+ power amplifier offers 4 channels of 600 W into 8 Ω with built-in DSP, in a 7 kg 1U rack case. It drives low-impedance loads down to 2 Ω as well as 70 V and 100 V lines.
The Void Acoustics Bias Q1+ power amplifier delivers 4 x 300 W into 8 Ω in class D, in a 7 kg 1U rack chassis. Its built-in DSP is controlled with ArmoníaPlus software.
The Void Acoustics Indigo Sub passive subwoofer combines a 12-inch bass-reflex driver with a sculpted fibreglass enclosure. It reaches down to 42 Hz and pairs with the Indigo 6 Pro thanks to an optional bracket.
The Void Acoustics Indigo 6 Pro passive public address speaker combines a 6.5-inch bass driver and a 1-inch coaxial compression driver. Compact and made of fibreglass, it mounts on the wall with the supplied bracket.
The Void Acoustics Indigo 6s passive public address speaker combines a 6.5-inch driver and a 1-inch coaxial soft-dome tweeter in a sculpted fibreglass cabinet. It has an 80° dispersion and mounts on the wall with its supplied bracket.
The Void Acoustics Cyclone Bass passive subwoofer combines a 12-inch driver with an IP-55 protected bass-reflex enclosure. It handles 600 W AES and connects via a Phoenix connector with link output.
The Void Acoustics Cyclone 208 passive subwoofer combines two 8-inch drivers with a bass-reflex fibreglass composite enclosure. Its response starts at 48 Hz depending on the preset, and the floor bracket is supplied.
The Void Acoustics Cyclone 10.1 passive speaker combines a 10-inch driver and a compression driver in an IP-55 composite cabinet. It has an 80° × 60° dispersion and reaches 122 dB continuous.
The Void Acoustics Cyclone 8 passive speaker combines an 8-inch bass driver and a 1-inch coaxial compression driver in an IP-55 fibreglass cabinet. It has a 90° dispersion and mounts on the wall or ceiling.
The Void Acoustics Cyclone 55.1 passive public address speaker combines two 5-inch drivers and two 1-inch tweeters in an IP-55 cabinet. It has a 110° × 70° dispersion and mounts on the wall with the supplied bracket.
The Void Acoustics Cyclone 4 passive speaker combines a 4-inch driver and a coaxial tweeter in a compact ABS enclosure rated IP-55. It has an 80° conical dispersion and comes with a T51 wall bracket.
The Void Acoustics Sub Vantage passive subwoofer brings together four 15-inch carbon-fibre drivers in an 18 mm birch cabinet. It reaches 142 dB continuous, for front-of-house use and DJ monitoring alike.
The Void Acoustics Air 15 passive subwoofer houses a 15-inch driver in a fibreglass enclosure rated IP-X3. It handles 800 W AES and reaches 129 dB peak.
The Void Acoustics Tri Motion passive PA speaker combines a 15-inch woofer, an 8-inch midrange and a 1.5-inch compression driver behind three triangular horns. It disperses 90° × 60° and mounts on a wall, a ceiling or a pole.
The Void Acoustics Air Stream passive PA speaker is a three-way DJ monitor: 15-inch and 12-inch woofers and a 1.5-inch compression driver. It disperses 70° × 40° and mounts on a 35 mm pole.
The Void Acoustics Air Motion V2 passive PA speaker combines three conical horns: a 12-inch woofer, an 8-inch midrange and a 1.5-inch driver. It disperses 60° × 50° and mounts on the ceiling, a truss or a pole.
Français
Deutsch
Italiano
