The Void Acoustics Cyclone 10.1 passive speaker combines a 10-inch driver and a compression driver in an IP-55 composite cabinet. It has an 80° × 60° dispersion and reaches 122 dB continuous.
The radiation pattern covers 80° horizontally and 60° vertically, which spreads the sound across large spaces. A 10-inch driver is paired with a 1-inch compression driver. The maximum level reaches 122 dB continuous and 128 dB peak.
The fibreglass composite cabinet limits resonances, and the reflex design reproduces the range from 75 Hz to 20 kHz. The grille and fixings are stainless steel. The finish resists UV, for indoor and outdoor use.
The weather-resistant cable glands take a Phoenix connector, with a link output to daisy-chain a second speaker. The nominal impedance is 8 Ω and the sensitivity 97 dB (1 W, 1 m). Plan for a Bias Q1.5+ amplifier at minimum for the 350 W AES power handling.
The T80-type mounting points suit many wall, ceiling, pole or truss brackets. The speaker measures 493 × 320 × 230 mm and weighs 14.5 kg, with an IP-55 protection rating. It comes in red with a black grille, black with a black grille and white with a white grille, and RAL and KROME finishes are available on request.
Data sheet
The Void Acoustics Bias Q1+ power amplifier delivers 4 x 300 W into 8 Ω in class D, in a 7 kg 1U rack chassis. Its built-in DSP is controlled with ArmoníaPlus software.
The Void Acoustics Bias Q1.5+ power amplifier offers 4 channels of 600 W into 8 Ω with built-in DSP, in a 7 kg 1U rack case. It drives low-impedance loads down to 2 Ω as well as 70 V and 100 V lines.
The Void Acoustics BIAS Q2+ is a 4-channel class D power amplifier delivering 1200 W per channel into 8 Ω. Its built-in DSP is controlled with ArmoníaPlus, in a 1U rack chassis.
The Void Acoustics BIAS Q3 power amplifier delivers 1400 W per channel into 8 Ω on four channels, with built-in DSP and a 4.3-inch touchscreen. It is controlled from the front panel or with ArmoníaPlus software, in a 2U rack format.
Français
Deutsch
Italiano
