Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch
    Void Acoustics Air Motion V2 in Geneva | Digistore.ch

Void Acoustics Air Motion V2 | Passive 3-way 12-inch PA speaker (each)

73398
CHF6,989.00 Tax included
Supplier stock – typically 4 to 7 days

The Void Acoustics Air Motion V2 passive PA speaker combines three conical horns: a 12-inch woofer, an 8-inch midrange and a 1.5-inch driver. It disperses 60° × 50° and mounts on the ceiling, a truss or a pole.

Color : Black
Quantity
Add to wishlist
Supplier delivery time usually between 4 and 7 days

The minimum purchase order quantity for the product is 2.

Two red three-horn speakers on stands in a hotel room

Three conical horns

Three transducers, each loaded by its own conical horn: a 12-inch woofer, an 8-inch midrange and a 1.5-inch compression driver. The conical geometry stabilises directivity and gives precise control of the beam width. The result stays clear and even across the whole listening area.

Red horns of a speaker facing a lively beach terrace

60° × 50° dispersion

The radiation pattern covers 60° horizontally and 50° vertically, for controlled coverage of a bar, a terrace or a room. The response runs from 135 Hz to 20 kHz, with a maximum level of 132 dB continuous and 138 dB peak. Sensitivity reaches 106 dB (1 W, 1 m) for the woofer and 108 dB for the mid-high section.

Two green speakers hanging from the ceiling on either side of a DJ booth

Mounting and amplification

The built-in mounting system allows suspension from the ceiling, a truss or a pole with Void brackets. At 35.4 kg, the speaker takes two people to handle. The woofer handles 500 W AES and the mid-high section 250 W AES at 8 Ω: Void recommends a Bias Q1.5+ amplifier or higher, with an optimised FIR preset. Two locking 4-pin connectors provide the input and the link to the next speaker.

Red three-horn speaker on a stand in front of a light concrete wall

Composite shell, RAL finishes

The low-resonance fibreglass composite horns have a smooth cellulose finish. The whole unit measures 854 × 672 × 660 mm. The range comes as standard in red, black or white, and RAL and KROME finishes are available on request.

Black = Black; White = White; Red = Red
73398

Data sheet

Color
Black, White, Red (RAL and KROME on request)
Nominal impedance
8 Ω
Sensitivity
LF: 106 dB, MHF: 108 dB (1 W, 1 m)
Installation type
Integrated mounting system
Tweeter
Compression 1.5 inch (38.1 mm)
Midrange driver
8 inch (200 mm)
Woofer
12 inch (305 mm)
Frequency response
135 Hz – 20 kHz
Recommended amplifier power
Bias Q1.5+
Connector
2 x 4-pin locking connector
Maximum SPL
132 dB cont, 138 dB peak
Power handling
LF: 500 W AES, MHF: 250 W AES
Width
85.4 cm
Depth
66.0 cm
Height
67.2 cm
Unit weight
35.4 kg
New

This website uses cookies to ensure you get the best experience on our website