Void Acoustics INCA 500 | 4-channel power amplifier, 4 x 125 W

Name: Void Acoustics INCA 500 | 4-channel power amplifier, 4 x 125 W
Brand: Void Acoustics
SKU: 73443
Price: 1890.00 CHF
Availability: BackOrder

Reference 73443

CHF1,890.00 Tax included

Supplier stock – typically 4 to 7 days

The compact Void Acoustics Inca 500 amplifier delivers 4 x 125 W into 4/8 Ω or 2 x 250 W at 70/100 V. Its matrix DSP is set up over Ethernet or Wi-Fi.

Description
Product Details

Black front of the Void Acoustics Inca 500 amplifier with its status indicators on a red background

Four compact channels

Two Inca 500 amplifiers fit side by side in a 1U rack space: the unit is a half-rack, 220 mm wide. It delivers 4 x 125 W into 4/8 Ω, or 500 W in total. The response extends from 20 Hz to 20 kHz (+0/-0.25 dB), with a signal-to-noise ratio above 106 dB A-weighted.

Rear panel of the amplifier with RCA inputs, green Euroblock terminals, RJ45 socket and mains inlet

Complete connectivity

Four analogue inputs accept balanced signals on Euroblock or unbalanced on RCA, and a stereo S/PDIF input goes through an RCA socket. An S/PDIF output lets you daisy-chain several amplifiers. The rear panel also holds the GPIO socket, the RJ45 Ethernet port and the IEC 60320 mains inlet.

Black amplifier on a light surface in front of a concrete wall

Low and high impedance

A single unit drives four outputs on 4 to 16 Ω loads, or two outputs at 70/100 V with 2 x 250 W. The mode is set from the network interface. Automatic power sharing distributes up to 2 x 250 W between channels according to each one's load.

Close-up of the front panel and the five status indicators of the amplifier

DSP and configuration

A built-in matrix DSP is set from a web browser, over Ethernet or Wi-Fi, and the Void preset library is compatible. Master/slave mode links several amplifiers over S/PDIF. Installation is on a wall, on a desk or in a rack; the unit measures 44 x 220 x 319 mm and weighs 2.8 kg.

Reference 73443

Data sheet

Product Type: Power Amplifier
Features: Integrated matrix DSP, S/PDIF master/slave mode, automatic power sharing
Audio outputs: 4 Lo-Z outputs or 2 Hi-Z 70/100 V outputs (Euroblock)
Number of channels: 4
Digital inputs: 1 x stereo S/PDIF (RCA)
Analog inputs: 4 x analogue (balanced Euroblock or unbalanced RCA)
Output power: 4 x 125 W into 4/8 Ω ; 2 x 250 W at 70/100 V
Series: Inca
Network connectivity: Ethernet RJ45, Wi-Fi
Nominal impedance: 4 to 16 Ω ; 70 V / 100 V lines
Installation type: Wall, desktop or half-width 1U rack mount
Amplification technology: Class D
Signal-to-noise ratio: ≥ 106 dB (A-weighted)
Power consumption: 150 W (standby 0.5 W maximum)
Frequency response: 20 Hz – 20 kHz (+0/-0.25 dB)
Connector: Euroblock (inputs, outputs, GPIO), RCA S/PDIF, RJ45, IEC 60320 mains
Distortion (THD): Less than 0.05 % (THD+N)
Width: 22.0 cm
Depth: 31.9 cm
Height: 4.4 cm
Unit weight: 2.8 kg