NAD C 588 | Belt-Drive Turntable | 3 YEAR WARRANTY

62708
CHF990.00 Tax included
Supplier stock – typically 4 to 7 days
The NAD C 588 is a Classic Series belt-drive turntable with a 9-inch carbon fibre tonearm and a pre-fitted Ortofon 2M Red cartridge. Its glass platter, MDF plinth and isolating feet limit the effect of vibration.
Quantity
Supplier delivery time usually 4 to 7 days

NAD C 588 turntable with closed dust cover next to a network player and a speaker

Consistent, natural speed

The C 588 is designed to keep music playing at the right pace, without the subtle fluctuations that distract from the performance. Its precision AC motor, electronically controlled and fed by an isolated power supply, keeps pitch and timing steady. Speed varies by less than 0.35 % at 33 rpm and less than 0.30 % at 45 rpm.

Black turntable in three-quarter view without cover, carbon fibre tonearm and glass platter

Carbon fibre tonearm

The 9-inch carbon fibre tonearm, longer than usual, optimises overhang and reduces tracking angle error. It combines a fixed metal headshell, a decoupled counterweight and magnetic anti-skate. Vertical tracking angle and azimuth adjustments, with an alignment gauge included, allow the stylus to be set precisely.

Turntable on a low cabinet between two speakers, below an acoustic panel

Ortofon 2M Red cartridge

The Ortofon 2M Red cartridge comes factory-fitted, for precise tracking and a nuanced full-range sound. It delivers 5.5 mV into an MM phono input loaded at 47 kΩ, with a recommended tracking force of 18 mN. The detachable RCA cable, with a separate ground wire, connects to the amplifier's phono stage.

Black turntable with raised dust cover, red cartridge at the end of the tonearm

Resonance under control

The 10 mm glass platter with felt mat, the precision alloy sub-platter, the solid MDF plinth and the carbon tonearm were chosen to work together against spurious vibration. Metal feet with tuned isolation and the thick non-resonant dust cover shield playback from speaker vibration and footfall. The turntable is 43.5 cm wide and 12.5 cm high.

62708

Data sheet

Product Type
Manual turntable
Features
10 mm glass platter with felt mat
78 rpm possible with a special pulley
Cartridge weight: 7.2 g
Counterweight for cartridges from 6 to 13 g
Decoupled counterweight and magnetic anti-skate
Detachable RCA cable with separate ground wire
Fixed metal headshell
Manual speed change
Metal feet with tuned isolation
Precision alloy sub-platter
Stylus compliance: 20 µm/mN
Tonearm overhang: 18 mm
Universal switch-mode power supply 15 V DC/0.8 A, 100-240 V AC, 47 - 63 Hz
Vertical tracking angle (VTA) and azimuth adjustment, alignment gauge included
Brand
NAD
Integrated phono
No
Color
Black
Technology
Carbon fibre tonearm
MDF plinth
Precision AC motor, isolated AC power supply
Series
Classic
Rotation speed
33-1/3 rpm and 45 rpm
Included cartridge
Ortofon 2M Red
Included dust cover
Yes
Drive type
Belt drive
Platter - Material
Glass
Tonearm - Length
230 mm
Tonearm - Mass
9.5 g
Signal-to-noise ratio
-70 dB
Wow and flutter
Less than 0.01 % (ref. 1 kHz, audio filter)
Speed drift
Less than ±0.35 % (33 rpm), less than ±0.30 % (45 rpm)
Tracking force
18 mN recommended (2M Red cartridge)
Range 0 - 30 mN (0 - 3.0 g)
Power consumption
5 W maximum, 0.3 W standby
Frequency response
20 Hz - 22 kHz (cartridge)
Pointe de lecture
Elliptical
Niveau de sortie
5.5 mV (2M Red cartridge)
Séparation des canaux
22 dB at 1 kHz (cartridge)
Impédance de charge recommandée
47 kΩ (2M Red cartridge, MM input)
Width
43.5 cm
Depth
34.0 cm
Height
12.5 cm
Unit weight
7.0 kg

Specific References

UPC
62708
EAN13
5703120250656
New

This website uses cookies to ensure you get the best experience on our website