FiiO FF5 | Black wired open earbuds

68803
CHF169.00 Tax included
Supplier stock – typically 4 to 7 days

The black FiiO FF5 is a wired open earbud with a 14.2 mm dynamic driver and carbon diaphragm, a detachable MMCX cable and interchangeable 3.5 / 4.4 mm plugs.

Quantity
To order

Black FiiO FF5 open earphones resting on a textured surface

14.2 mm dynamic driver

The FiiO FF5 is a wired open-type earbud fitted with a large 14.2 mm dynamic driver. Its carbon-based diaphragm, combined with a polyurethane surround, stays light while remaining rigid. This combination limits stray driver movement, which reduces non-linear distortion and favours fast transients and detailed treble.

Transparent box of silicone rings and foam tips

Diffuse open design

The FF5 adopts a diffuse open design with an acoustic damping device that lets part of the air pressure escape to the outside. Internal reflections and standing waves are thus reduced, for a purer sound. Acoustic resistance tubes lower the resonance at the bottom of the spectrum to extend and texture the bass.

CNC-machined aluminium alloy shell of the earphone

Aluminium chassis and comfort

The FF5 shell is machined from an aluminium alloy, a material chosen for its durability and lightness: one earbud weighs only about 3.4 g, enough to be forgotten in the ear. The FF5 comes with non-slip silicone rings in sizes M and L and several sets of foam tips, to adjust the fit and the tonal balance.

Cutaway view of the earphone driver

MMCX cable and interchangeable plugs

The FF5 ships with a detachable cable with MMCX connectors, made of four strands gathering 392 wires of silver-plated monocrystalline copper in Litz braiding, about 1.2 m long. The interchangeable plug system switches from the 3.5 mm single-ended jack to the 4.4 mm balanced one depending on the source. The detachable cable also allows it to be replaced when worn.

68803

Data sheet

Product Type
Wired open-ear earbuds with dynamic drivers
Brand
FiiO
Color
Black
Technology
CNC-machined aluminum alloy enclosure, open-back design with acoustic damping, acoustic reflex tubes for bass extension
Headphone type
Open-ear (earbud), not in-ear
Hi-Res Audio
Frequency response: 20 Hz – 20 kHz
Nominal impedance
45 ohms at 1 kHz
Sensitivity
106 dB/mW at 1 kHz
Connections
Detachable MMCX cable, silver-plated monocrystalline copper (4 strands, 392 wires, Litz braiding), interchangeable 3.5 mm unbalanced / 4.4 mm balanced jack, length approximately 1.2 m
Headphone design
14.2 mm dynamic transducer with a carbon-based diaphragm and polyurethane seal
Unit weight
3.4 g per earbud (without cable)

Specific References

UPC
68803
EAN13
6953175740933
New

This website uses cookies to ensure you get the best experience on our website