Audeze LCD-MX4 | Premium Planar Magnetic Headphone

70290
CHF2,999.00
Supplier stock – typically 4 to 7 days
Audeze LCD-MX4, open-back magnetostatic headphones built for the studio, with magnesium housing and carbon headband. At 20 ohms and 105 dB/1 mW, it's the most sensitive LCD in the Audeze range.
Quantity
On order

Audeze LCD-MX4 headphone resting on a studio mixing console

Magnesium and carbon, 30% less

The LCD-MX4's housing is made of magnesium and the headband of carbon: this construction removes about 30% of the weight of other models in the LCD series. The headphone comes down to 575 grams, a figure that matters over a multi-hour mastering session.

Headphone resting on a mixing console, black-and-white photo

Dual Fluxor and 106 mm transducer

The patented dual-magnet Fluxor structure from Audeze combines N50 neodymium magnets with a 106 mm planar magnetic transducer. Fazor technology corrects phase response inside the earcup and widens the frequency range, from 10 Hz to 50 kHz, with distortion under 0.1% at 100 dB.

Dual 4-pin mini-XLR cable and 6.35 mm jack plug on the carrying case

20 ohms, no dedicated amplifier

With an impedance of 20 ohms and a sensitivity of 105 dB/1mW, the LCD-MX4 can be driven directly from a laptop or a mixing console, without an additional headphone amplifier. Power handling reaches 5 W RMS, for a maximum SPL above 130 dB.

Headphone seen from the front, earcup grille and carbon-and-leather headband

Memory foam earpads

The carbon and leather headband combined with memory foam earpads holds the headphone in place without clamping. The LCD-MX4 comes with a 1.9-metre cable terminated in a 6.35 mm jack plug and two 4-pin mini-XLR connectors, a carrying case and its certificate of authenticity.

70290

Data sheet

Product Type
Over-ear headphones
Brand
Audeze
Headphone type
Open-back circumaural
Nominal impedance
20 Ohm
Sensitivity
105 dB/1 mW
Headphone design
106 mm planar magnetic, ultra-thin diaphragm, N50 neodymium magnet array, Fazor phase management
Drive type
Planar magnetic
Frequency response
10 Hz – 50 kHz
Recommended amplifier power
250 mW recommended (100 mW minimum)
Aimant
N50 Neodymium
Cable length
1.9 m
Connector
4-pin mini-XLR to 6.3 mm jack
Distortion (THD)
below 0.1 % at 100 dB
Maximum SPL
above 130 dB
Power handling
5 W RMS
Unit weight
575 g

Specific References

UPC
70290
EAN13
819343015066
New

This website uses cookies to ensure you get the best experience on our website