Monitor Audio Bronze On-Wall 7G | On-Wall Speaker (piece) | 5 YEAR WARRANTY

73625
CHF350.00 Tax included
Supplier stock – typically 4 to 7 days
Monitor Audio Bronze On-Wall 7G, a two-way on-wall speaker only 135 mm deep, for stereo or surround duty. Sold individually.
Color : Black
Quantity
Supplier delivery time usually 4 to 7 days

The minimum purchase order quantity for the product is 2.

Bronze On-Wall 7G speaker in a lifestyle setting

135 mm deep

Mounted on the wall, the Bronze On-Wall 7G projects only 135 mm. From the front it measures 465 x 300 mm, and it weighs 7 kg. It works as a stereo speaker or as a surround channel.

White front, bass-mid driver and tweeter

6-inch C-CAM driver

Bass and midrange run through a single 6-inch C-CAM driver. The bass reflex port is tuned to 47 Hz. In-room response reaches 42 Hz at -6 dB, a low figure for such a flat cabinet.

Walnut on-wall speaker at three-quarter angle

Tweeter with UD waveguide

Above 3.0 kHz, a 25 mm C-CAM Gold dome takes the signal. It is mounted with a UD waveguide and extends to 30 kHz. The crossover is a new design.

Back of the black on-wall speaker

30 to 100 W amplifier

Into 8 ohms, Monitor Audio recommends 30 to 100 W. Minimum impedance is 4.7 ohms at 17 kHz and sensitivity is 88 dB. Peak SPL reaches 112 dB; finishes are Black, White and Walnut.

Black = Black · White = White · Walnut = Walnut
73625

Data sheet

Product Type
Wall speaker
Brand
Monitor Audio
Technology
Ported
Nominal impedance
8 ohms
Sensitivity
88 dB (2.83 Vrms @ 1 m)
Tweeter
1 x 25 mm C-CAM Gold Dome tweeter
Woofer
1 x 6" C-CAM bass mid driver
Frequency response
42 Hz - 30 kHz (-6 dB, in-room)
Recommended amplifier power
50 - 200 W into 4 ohms / 30 - 100 W into 8 ohms (RMS)
Maximum SPL
112 dB (peak, AES75, Z-weighted)
Power handling
100 W (CTA 426-B)
Width
30.0 cm
Depth
13.5 cm
Height
46.5 cm
Unit weight
7.0 kg

Specific References

EAN13
5061070620661
New

This website uses cookies to ensure you get the best experience on our website