XGIMI MIRA Pro, a 4K ultra-short-throw projector with a 3000 ISO lumen RGB triple laser. Placed in front of the wall, it forms an 80 to 120-inch image that stays readable in daylight, with latency down to 1 ms for gaming.

The MIRA Pro's three RGB lasers reach 3000 ISO lumens, 1000 more than the MIRA. The image keeps its impact in full daylight as well as in the evening, on a 0.39-inch DLP chip at 3840 x 2160. Contrast reaches 20,000:1 with DBLE enabled, with 110% of BT.2020 and a typical ΔE below 1.
In game mode with VRR active, latency drops to 1 ms at 1080p and 240 Hz. Game mode comes with Standard, FPS, RTS, RPG and Sports profiles, and MEMC smooths fast motion. For films, Dolby Vision, HDR10+ and HLG are supported, as is 3D in Frame Packing and Side by Side.
Placed at the foot of the wall, the MIRA Pro forms an 80 to 120-inch image with its 0.175:1 throw ratio. ISA 5.0 for UST handles focus, keystone and intelligent eye protection. On an XGIMI ALR screen, alignment assist fits the four edges of the image to the frame.
The 36 W Harman Kardon system decodes DTS-HD, DTS Virtual:X and Dolby Digital Plus. Google TV runs on an MT9679 processor, over Wi-Fi 6 or the LAN port. The 5.3 kg unit stays below 28 dB at 1 m in low-noise mode, and its audio and optical outputs feed an external system.
Data sheet
Specific References
Lumene Capitol HD 150C manual retractable projection screen (16:9 aspect ratio), 155 cm wide. Lumene HD screen with a gain of 1.0, black borders, and a light-blocking backing; mounts to the wall or ceiling using clips.
Lumene Capitol HD 170C manual retractable projection screen (16:9 aspect ratio), 171 cm wide. Lumene HD screen with a gain of 1.0, black borders, and a light-blocking backing; wall- or ceiling-mounted using clips.