The PMC ci30 is a passive 2-way speaker for in-wall or in-ceiling installation, or surface mounting, sold per piece. Its 133 mm bass driver on a 1.5 m ATL line reaches down to 47 Hz in a 30 x 30 cm enclosure.

The ci30 is the smallest model in PMC's ci series: 300 x 300 mm at the front and 103 mm deep. It fits into a wall or ceiling, or mounts on the surface. PMC intends it for surround channels, Dolby Atmos channels and stereo listening in small rooms.
For surface mounting, the speaker hooks onto the supplied interlocking bracket, which adjusts precisely for plumb. The optional OWK sleeve, in white or black, dresses the enclosure and hides the in-wall fixing system. You connect it through a pair of 4 mm sockets.
The 133 mm bass driver, with an LT natural fibre cone, loads an ATL transmission line of 1.5 m effective length. The response reaches down to 47 Hz (-3 dB) and up to 25 kHz with the 27 mm soft dome tweeter. For 84 dB sensitivity into 8 ohms, PMC recommends an amplifier of 40 to 150 W.
The micro-perforated grilles attach magnetically and sit flush with the front, with no visible frame. They come in silk white, and a black grille is available as an option. For in-wall installation, the spring-loaded Qikfire system tightens with one turn of a screwdriver and releases the same way.
Data sheet
Wilson Spk Cable 4 mm² 2 x 3 m: two 3-metre speaker cables in OFC copper, 4.0 mm² cross-section. They are supplied with pre-installed banana plugs, ready to connect.