The AltitudeCI 32 sits at the top of the standard range, with 32 discrete outputs. It drives systems from 13.4.6 to 11.6.8 and beyond, with several Amplitude16 amplifiers. The 32 channels go out over Dante or as AES/EBU on two DB25 connectors.
Optimizer, WaveForming and Remapping run at full resolution across all 32 channels. Guided calibration relies on the 3D microphone connected via Ethercon, whose compensation file loads on its own. Older Trinnov microphones are not recognised, and presets from an Altitude16 or Altitude32 cannot be carried over.
On the input side, 32 Dante channels and 32 AES/EBU channels on two DB25 connectors join the four HDMI 2.1 inputs and the coaxial and optical S/PDIF. All inputs are independent. Via AES67, the processor can also receive the stream from a Dolby media server.
The chassis takes up 2U in a rack, with removable rack ears, and weighs 8.6 kg. It draws 140 W at most and 0.5 W in standby, and its 480 BTU/h at full load are removed by temperature-controlled fans. Standby and fast start are built into the firmware.
Data sheet
Français
Deutsch
Italiano
