Technical specifications
- Output power: 3/4 / 5 x 150W EN 8 OHMS (C53 / C54 / C55)
- Minimum load: 2 ohms
- Analog inputs: 3/4/5 x symmetrical (XLR), 3/4/5 x asymmetrical (RCA),
- Control entries: 1 x Mini-Jack 5-12V trigger
- Control outputs: 1 x Mini-Jack 11,9V trigger
- Gain control: Switchable between 23dB and 29dB (individual)
- Phase control: Switchable 1/180 (individual)
- Frequency answer: 5HZ -100KHz
- Signal / noise ratio: More than 100dB
- Crosstalk: Less than -100db
- Distortion: Less than 0.01% @ 100W
- Intermodulation 8 Ohms 1kHz: Less than 0.01% (19kHz + 20kHz)
- Depreciation factor: More than 2000 (main power output stage)
- Net weight: 28,5kg / 33kg / 37.5 kg
- Gross weight: 34KG / 38,5KG / 43KG
- US net weight: 61Lbs / 73lbs / 82lbs
- US gross weight: 75LBS / 85LBS / 95LBS
- Dimensions (b x h x d handles included, feet excl.): 48.2cm x 13,2cm x 52cm
- Dimensions in US (B x H x D Inclined Handles, Excl. Foots): 18.97in x 5.2in x 20.47in
- Special features: Symmetrical and asymmetric inputs, entry / trip output, modular design, adjustable back rack assembly, gain and phase selectors
Overview
A multichannel amplifier designed for sound performance ... which is not sold at gold prices. And always adapted to your needs. It's too good to be true? Well, that was, but more now. Power amplifiers to 3, 4 or 5 channels of the series Hegel C5 can be mounted in rack, configured, depending on your needs and, more importantly, will dazzle you through their sound performance. Up to 5 150W / channel analog amplifier power channels, with enough current to work with almost any speaker on the market. Get acquainted with the series Hegel C5.
Presentation of high performance multichannel amplifiers The most versatile market - The series Hegel C5.
The C5 is available in 3 different versions, adapted to your needs. You can choose a 3, 4 or 5 channel configuration. This means that you can build a 5.1 or Dolby Atmos® home cinema using one or more C5. Maybe you want to use bi-amplified speakers or use active crossovers? You can also use it to power several speakers in a recording studio, in a restaurant or at home. In short, wherever you need its high performance with dynamics and ultra low distortion.
As flexible as they are, the C5 series amplifiers always retain the entire sound Hegel. C5 uses the patented SoundEngine2 technology with its many benefits. Mon two is the possibility to use a low polarization, which means that high-power A / B lamplifier does not heat as much as normal, which allows you to locate in a rack 19. The very high mortification factor (over 2000) is another benefit of the SoundEngine2. A higher damping factor means deep bass and a complete control of low bass speakers. This is one of the reasons people talk about the dynamic sound of Hegel. But the most important thing is its low distortion. The patented SoundEngine2 amplifiers of Hegel Always work as a noise reduction helmet. All distortion elements created in the amplifier circuits are dynamically canceled by being read in the negative phase. Whatever the configuration chosen, the C5 series will offer a spectacular sound scene. Never hard or unpleasant. Always natural, smooth and with incredible dynamics.
Versatility goes well beyond the number of audio channels and means of use. The ability to change the phase individually or choose between different gain settings for each channel greatly facilitates integration into a larger system. The input and output of the trigger (allows serial chaining) means that you can place it in a separate room without worrying about activating it or deactivating it. The C55 has a height of 3U, with denormal rack-mounted ears that are an integral part of the lamplifier hull. In case of installation in a rack, we recommend a spacing of 1U up and down. There are also removable and adjustable rear mounting ears. If you do not choose to install it in a rack, the feet are provided in the accessory box. This means that the C5 series can kindly sink to any application.
Français
Deutsch
Italiano
