Wilson Raptor 3: two-way bass-reflex bookshelf speaker in black or white finish. A 25 mm tweeter and a 6.5-inch driver cover 50 Hz to 20 kHz.
The Raptor 3 is a quality bookshelf speaker with a classic, carefully finished design. It sits on a shelf unit or a stand, in stereo or as a front or surround channel in a home cinema system. It matches the towers, the centre speaker and the subwoofers of the Raptor series technically and visually.
A 25 mm soft-dome tweeter takes over from a 6.5-inch mid-woofer at 2600 Hz. The response extends from 50 Hz to 20 kHz (±3 dB). The 88 dB sensitivity and 4 to 8 ohm impedance suit an amplifier of 25 to 125 W, for a maximum level of 108 dB.
The port is located at the back of the cabinet, which reinforces the bass without needing a large volume. The cabinet measures 195 x 320 x 262 mm and weighs 6.5 kg. The black fabric grille, acoustically transparent, attaches to pegs, and rubber feet are supplied. A single terminal block takes the speaker cable.
The Raptor 3 comes in black or white, with a visible wood-grain structure. A wood-effect vinyl covering wraps the sides, top and back, and the front receives a slight gloss. The white resists yellowing in a very sunny room.
Data sheet
Specific References
Wilson Spk Cable 4 mm² 2 x 3 m: two 3-metre speaker cables in OFC copper, 4.0 mm² cross-section. They are supplied with pre-installed banana plugs, ready to connect.
KEF SQ1 aluminium floor stand for the Coda W, Q1 Meta, Q3 Meta and Q Concerto Meta speakers. Fillable column, internal cable routing, sold as a pair.
Français
Deutsch
Italiano
