PMC twenty5.22i Active | Active bookshelf speaker (pair)

73987
CHF6,290.00 Tax included
Supplier stock – typically 4 to 7 days

The PMC twenty5.22i Active is an active 2-way bookshelf speaker with two 100 W amplifiers per speaker. Its 170 mm bass driver on a 2 m ATL transmission line reaches down to 39 Hz.

Quantity
Supplier stock - 4 to 7 days

Walnut bookshelf speaker on a stand, in front of a white textured wall and a coffee table

A bookshelf speaker for larger rooms

The twenty5.22i grows a little compared with the 21i to fill larger rooms. Its cabinet measures 41 cm high, 19.2 cm wide and 35.7 cm deep including connectors, and weighs 10.15 kg. It sits on its dedicated stand or on a shelf. A front grille adds 9 mm.

Brushed aluminium rear panel with mains socket, balanced XLR input and RCA input, on a walnut cabinet

Built-in active amplification

Each speaker houses two 100 W RMS amplifiers, one per driver, placed after an analogue active crossover. Just connect a preamplifier or a streamer with volume control, with no separate power amplifier. The rear panel brings together a balanced XLR input and an unbalanced RCA input. Two sensitivity levels are selectable: 99 dB or 109 dB at 1 m for 1 Vrms.

Close-up of a soft dome tweeter behind its dispersion grille, on a walnut front

19 mm SONOMEX tweeter

Treble is handled by a 19 mm PMC/SEAS soft dome in SONOMEX fabric, cooled by ferrofluid. Its 34 mm surround and dispersion grille widen the dispersion. The active crossover hands it the signal from 1.75 kHz, and the response extends up to 25 kHz.

Pair of walnut bookshelf speakers on black stands, seen from the front and the back

2 m ATL line

The 170 mm (6.5 inch) long-excursion bass driver with a g-weave cone sits on a cast alloy chassis. It loads an ATL transmission line of 2 m effective length, which exits through a Laminair vent. The response thus reaches down to 39 Hz. The bass stays clean and powerful, without overhang.

Light Wood = Oak
73987

Data sheet

Product Type
2-way active bookshelf speaker
Brand
PMC
Analog inputs
Balanced XLR and unbalanced RCA
Output power
2 x 100 W RMS per speaker (HF 100 W, LF 100 W)
Color
Oak, Walnut, Diamond Black
Technology
Advanced Transmission Line (ATL), effective length 2 m, Laminair vent
Series
Active twenty5i
Nominal impedance
Input impedance above 14 kOhm
Sensitivity
99 dB SPL at 1 m for 1 Vrms (low setting) / 109 dB (high setting)
Amplification technology
Active bi-amplification, active crossover
Tweeter
PMC/SEAS 19 mm SONOMEX fabric soft dome, ferrofluid cooled, 34 mm surround, dispersion grille
Woofer
1 × 170 mm (6.5 in) long-throw g-weave cone, cast alloy chassis
Frequency response
39 Hz - 25 kHz
Width
19.2 cm
Depth
35.7 cm
Height
41.0 cm
Unit weight
10.15 kg
New

This website uses cookies to ensure you get the best experience on our website