Compact Q Acoustics 5010 bookshelf speaker, with a 110 mm C3 midbass driver and a sealed 25 mm tweeter. It reaches down to 56 Hz (-6 dB) and measures 264 x 160 x 263 mm.
The 110 mm C3 midbass driver uses a cone with a continuous curved profile, with no break between the centre and the edge. It combines the bass control of a straight cone with the midrange control of a flared one. A large magnet coupled to a large voice coil raises power handling by 50 % compared with a similar driver with a 25.4 mm coil. The response extends from 56 Hz to 30 kHz (-6 dB).
The 25 mm tweeter is hermetically sealed and mechanically isolated from the baffle. Neither the internal pressure of the cabinet nor the neighbouring midbass driver makes it vibrate. Its inner chamber is vented to lower distortion. The crossover hands it the signal from 2.5 kHz.
P2P (Point to Point) braces stiffen the areas of the cabinet that need it. The stereo image gains in precision and bass vibrations are reduced. The baffle is laminated with a layer of butyl rubber that damps its resonances. The internal volume reaches 5.0 L per speaker.
This bookshelf speaker comes in Satin Black, Satin White, Holme Oak and Santos Rosewood. The black baffle with acrylic trim is the same across all finishes. Each speaker measures 264 x 160 x 263 mm and weighs 5.6 kg. The nominal impedance is 6 Ω, with a sensitivity of 86.3 dB.
Data sheet
Specific References
KEF SQ1 aluminium floor stand for the Coda W, Q1 Meta, Q3 Meta and Q Concerto Meta speakers. Fillable column, internal cable routing, sold as a pair.
Français
Deutsch
Italiano
