• New
EPOS ES7N in Geneva | Digistore.ch
EPOS ES7N in Geneva | Digistore.ch
EPOS ES7N in Geneva | Digistore.ch
EPOS ES7N in Geneva | Digistore.ch
    EPOS ES7N in Geneva | Digistore.ch
    EPOS ES7N in Geneva | Digistore.ch
    EPOS ES7N in Geneva | Digistore.ch
    EPOS ES7N in Geneva | Digistore.ch

EPOS ES7N | 2-way bookshelf loudspeaker

73202
CHF1,000.00 Tax included
Supplier stock – typically 4 to 7 days
2-way EPOS ES7N bookshelf loudspeaker. Available in black, white, walnut and orange, sold individually.
Color : Black
Quantity
Add to wishlist
Supplier delivery time usually 4 to 7 days

Black EPOS ES7N loudspeaker on a stand, next to an armchair

Compact size, controlled bass

The ES7N houses a 130 mm mica-filled polypropylene mid-bass driver and a 28 mm tweeter in a cabinet measuring 290 x 200 x 270 mm for 7.6 kg. The cabinet pairs two 8 mm MDF panels separated by a damping layer, and a single brace is enough to quieten its resonances. A wooden block in the upper section sharpens the stereo image.

Pair on stands either side of a low white sideboard

Crossover switch, upper position

A switch on the rear panel selects between two versions of the crossover. In the upper position you place the loudspeakers 30 to 50 cm from the wall, as they are here on stands. Sensitivity is then 86 dB, for an impedance of 4 ohms dropping to a minimum of 3 ohms at 15 kHz. The baffle is asymmetric: place the tweeter towards the inside.

Black loudspeaker fitted into one cube of a vinyl record wall

Lower position, against the wall

In the lower position the same switch adapts the crossover to listening against a wall or inside a bookshelf, and sensitivity rises to 89 dB. The cabinet's dimensions let it sit on standard shelving without overhang. The port is bent and opens between the two side panels, with damped vents that control its output through the midrange.

Walnut finish in front of a slatted wood wall

Four catalogue finishes

The ES7N comes in semi-matt black, semi-matt white, walnut and semi-matt orange. Four inserts under the cabinet take 4 mm screws, and silicone rubber spikes are supplied to isolate the loudspeaker from its support. EPOS recommends a stand around 70 cm high.

73202

Data sheet

Product Type
2-way bass-reflex bookshelf loudspeaker
Nominal impedance
4 Ω (minimum 3 Ω at 15 kHz)
Sensitivity
86 dB / 89 dB (2.83 V / 1 m)
Tweeter
28 mm ceramic-coated aluminium dome
Woofer
130 mm mica-filled polypropylene
Width
20 cm
Depth
27 cm
Height
29 cm
Unit weight
7.6 kg

Specific References

EAN13
9502357672875
New

Complete your speakers

This website uses cookies to ensure you get the best experience on our website