Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
    Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
    Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
    Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
    Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch
    Trinnov OPT-MIC3 XLR3 in Geneva | Digistore.ch

Trinnov OPT-MIC3 XLR3 | 3D measurement microphone

53449
CHF700.00 Tax included
Supplier stock – typically 4 to 7 days
Trinnov OPT-MIC3 XLR3 four-capsule 3D measurement microphone, with a 3-pin XLR connector, for Optimizer calibration. It locates each speaker to within 2° and measures its distance to within 1 cm.
Quantity
Add to wishlist
Supplier delivery time usually 4 to 7 days

Four-capsule measurement microphone on a suspension mount and boom, cable connected

Capsules in a tetrahedron

Four capsules, mounted at the tips of thin brass tubes, form a tetrahedron. This array captures the impulse response of every speaker and every subwoofer, then locates each of them in three dimensions.

Close-up of the 3D microphone head, brass tubes and red LED

Position accurate to 2°

For each speaker, azimuth and elevation are measured to within 2°, and distance to within 1 cm. The processor also receives frequency response, phase, group delay and absolute SPL level. Optimizer therefore corrects from the real position of the speakers.

Tilted microphone head, red LED lit against a blurred red and blue background

Measured one by one

Every Trinnov microphone is individually tested and measured at the factory. This measurement produces a compensation file specific to that unit. The response stays flat within ±0.1 dB from 20 Hz to 24 kHz.

3D microphone standing on its base in front of a silver Trinnov processor

Essential for Remapping

Trinnov's Remapping requires this microphone: other measurement microphones do not provide the data it needs. This OPT-MIC3 version connects via a 3-pin XLR connector.

53449

Data sheet

Product Type
3D measurement microphone
Features
3D speaker localisation
Absolute level measurement
Compatible with all Trinnov models except NOVA / AltitudeCI
Compensation file: USB stick or via my.trinnov.audio (dealers only)
Individual calibration
Measured per speaker: frequency response, phase, group delay, impulse response, distance, azimuth, elevation and absolute SPL
Brand
Trinnov
Technology
4 capsules mounted at the top of thin brass tubes, tetrahedral layout
Frequency response
20 Hz – 24 kHz (±0.1 dB)
Connector
3-pin XLR

Specific References

UPC
53449
New

This website uses cookies to ensure you get the best experience on our website