KEF KW2 RX Récepteur sans fil pour XIO

72025
CHF189.00 Tax included
24‑hour delivery
Wireless receiver KEF KW2 RX for his XIO bar. It receives the signal from the Xio and transmits it to the subwoofer, without cable between the two.
Quantity
Last items in stock

Black wireless receiver module posed on a light background

Wireless subwoofer

The KW2 RX receives the radio signal from the XIO soundbar and transmits it to the subwoofer on which it is fixed. The cable between the bar and the box disappears, and the box is where the acoustics of the room demand. The link carries up to 15 meters in direct line since the Xio.

Rear face of the module and its protective cover

Mounting on boxes KEF

Four connection sheets ensure the transmission between the sound bar and the box. The module attaches to the back of the active caissons KEF, including KC62, KC92, KF92 and the Kube range. A screw set is provided for installation.

Module seen three quarters next to his hood

Outputs to and optics

An output combined with 3.5 mm and optical TosLink makes it possible to connect a subwoofer of another mark. The module feeds by the supplied USB-C cable. A hood masks the supposed remaining cards when direct mounting is not used.

The module installed on the back of a subwoofer in a living room

Format and transmission

The module is 72 x 37 x 31 mm for 50 grams and is forgotten behind the box. It transmits in 2.4 GHz with a resolution of 24 bits / 48 kHz, a 20 Hz response to 20 kHz and a latency of 57 ms. The signal / noise ratio exceeds 80 dB for distortion of less than 0.2%.

72025

Data sheet

Product Type
Accessory
Frequency response
20 Hz – 20 kHz
Width
3.7 cm
Depth
3.1 cm
Height
7.2 cm
Unit weight
0.05 kg

Specific References

EAN13
0637203219252
New

This website uses cookies to ensure you get the best experience on our website