Void Acoustics Cyclone 208 | Passive 2 x 8-inch subwoofer

73423
CHF1,990.00 Tax included
Supplier stock – typically 4 to 7 days

The Void Acoustics Cyclone 208 passive subwoofer combines two 8-inch drivers with a bass-reflex fibreglass composite enclosure. Its response starts at 48 Hz depending on the preset, and the floor bracket is supplied.

Color : Black
Quantity
Supplier delivery time usually between 4 and 7 days

Red Void Acoustics Cyclone 208 subwoofer on its bracket in front of a light concrete wall

Dual 8-inch drivers

Two 8-inch bass drivers work in a bass-reflex enclosure. The response starts at 48 Hz, depending on the preset chosen. Sensitivity reaches 95 dB (1 W, 1 m) and power handling 300 W AES.

Rear of a red subwoofer with its connection plate and steel bracket

Weather-resistant connection

Weather-resistant cable glands protect the cable entry. A Phoenix connector with link output passes the signal on to the next unit. Nominal impedance is 8 Ω and the manufacturer recommends a Bias Q1+ amplifier at minimum.

Red subwoofer with black perforated grille, Void logo and mounting bracket on a cream background

Level and dispersion

Maximum level reaches 119 dB continuous and 125 dB peak. Dispersion is omnidirectional. The manufacturer designs this subwoofer to complement the Cyclone 4 and Cyclone 55 speakers in small systems.

Subwoofer in a custom green finish, black grille and mounting bracket

Composite shell, floor bracket

The low-resonance fibreglass composite enclosure has a smooth, UV-resistant cellulose finish. It measures 513 × 296 × 300 mm and weighs 22 kg. A floor mounting bracket is supplied, and the grille and hardware are stainless steel. Red, black or white finishes are standard, RAL and KROME shades on request.

Black = Black; White = White; Red = Red
73423

Data sheet

Color
Red, black or white (RAL and KROME on request)
Nominal impedance
8 Ω
Sensitivity
95 dB 1W/1m
Installation type
Floor-mounting bracket supplied
Woofer
2 x 8-inch
Frequency response
48 Hz – depending on the preset
Recommended amplifier power
Bias Q1+
Connector
Phoenix connector with link output
Maximum SPL
119 dB continuous, 125 dB peak
Power handling
300 W AES
Width
29.6 cm
Depth
30.0 cm
Height
51.3 cm
Unit weight
22.0 kg
New

This website uses cookies to ensure you get the best experience on our website