Anthem STR Integrated | Stereo integrated amplifier with DAC and phono stage

Name: Anthem STR Integrated | Stereo integrated amplifier with DAC and phono stage
Brand: Anthem
Price: 5999.00 CHF
Availability: BackOrder

Reference 59441

CHF5,999.00

Supplier stock – typically 4 to 7 days

Anthem STR Integrated stereo integrated amplifier with a DAC, MM and MC phono inputs and ARC Genesis room correction. It delivers 200 W per channel into 8 ohms, 400 W into 4 ohms and 550 W into 2 ohms.

Color : Black

Black
Silver

Quantity

Add to wishlist

Supplier delivery time usually 4 to 7 days

Description
Product Details

Front panel of a black integrated amplifier with a large TFT display and volume knob, on a dark reflective surface

Up to 550 W per channel

The output stage delivers 200 W into 8 ohms, 400 W into 4 ohms and 550 W into 2 ohms per channel, continuously. It relies on eight bipolar output devices per channel and a toroidal transformer. The Advanced Load Monitoring circuit watches temperature, current and voltage to protect the amplifier.

Man lying on a sofa listening to music, black amplifier in the foreground surrounded by red sound waves

DAC and asynchronous USB

Lower-resolution sources are upsampled to 24-bit / 192 kHz. The asynchronous USB input accepts PCM up to 32-bit / 384 kHz and DSD 2.8 / 5.6 MHz. Coaxial and optical S/PDIF inputs and a balanced AES/EBU input complete the digital section.

Rear panel of a black amplifier with close-ups of the digital inputs, XLR inputs, RCA outputs and speaker terminals

Connections, phono and subwoofers

Two separate phono inputs, MM and MC, sit in a shielded section. Analog inputs are available as balanced XLR and unbalanced, and Analog Direct mode bypasses all digital processing. Bass management drives one or two subwoofers, in mono or stereo, with ARC Genesis and its four storable profiles.

Silver and Black front panels side by side in front of a living room, with a close-up of the Next and Mute buttons

Black or Silver finishes

The Black and Silver finishes frame a high-resolution TFT display. Control is by the supplied IR remote, Ethernet or RS-232. The chassis measures 43.2 cm wide, 17.2 cm high and 44.5 cm deep, and weighs 18 kg unpacked.

Black = Black; Silver = Silver

Reference 59441

Data sheet

Product Type: Integrated amplifier
Brand: Anthem
Integrated DAC: Yes
Audio outputs: Speaker binding posts
Number of channels: 2
Digital inputs: Coaxial RCA digital
Optical digital (Toslink)
Analog inputs: Balanced XLR
Stereo RCA analogue
Output power: 200 W (8 Ω), 400 W (4 Ω), 550 W (2 Ω)
Phono inputs: MM / MC
Color: Black
Silver
Series: STR
Connections: Relay trigger (3.5 mm mono jack)
Amplification technology: Class AB
Signal-to-noise ratio: 82 dB (MC), 96 dB (MM) (phono)
110 dB (preamp, analogue input, DSP mode, 2 Vrms)
112 dB (preamp, digital input, 44.1 kHz, 0 dBFS)
114 dB (amplifier, IEC-A, ref. 200 W)
120 dB (preamp, analogue input, Direct mode, 2 Vrms)
Power consumption: 0.38 W (120 V), 0.45 W (240 V) (standby)
1.1 W (120 V), 1.2 W (240 V) (standby, IP control enabled)
40 W (idle)
250 W (typical load)
500 W (high output)
Frequency response: 0 Hz - 45 kHz (+0.00/-0.50 dB) (preamp, digital input 96 kHz)
10 Hz - 20 kHz (+0.00/-0.03 dB) (preamp, digital input 44.1 kHz)
10 Hz - 40 kHz (+0.02/-0.20 dB) (preamp, analogue input, DSP mode)
10 Hz - 50 kHz (+0.00/-0.50 dB) (preamp, digital input 192 kHz)
10 Hz - 80 kHz (+0.00/-0.10 dB) (preamp, analogue input, Direct mode)
20 Hz - 20 kHz (±0.1 dB) (amplifier)
Niveau de sortie: 2.2 Vrms, 3.3 Vrms in analogue direct (THD below 0.1%)
Séparation des canaux: 101 dB (100 Hz), 61 dB (10 kHz)
Distortion (THD): 0.0008% (preamp, digital input 44.1 kHz, 0 dBFS)
0.001% (preamp, analogue input, DSP mode, 1 Vrms)
0.002% (1 kHz), 0.015% (20 kHz) (amplifier, THD at 100 W)
0.0020% (preamp, analogue input, Direct mode, 1 Vrms)
0.008% (MC), 0.005% (MM) (phono, THD+N)
Width: 43.2 cm
Depth: 44.5 cm
Height: 17.2 cm
Unit weight: 18.0 kg