PMC PMC8-2 | 3-way active studio monitor (piece)

CHF7,990.00 Tax included
Supplier stock – typically 4 to 7 days

The PMC8-2 is a 3-way ATL-loaded active studio monitor, sold individually. Two 200 mm bass drivers on a 3 m ATL line reach down to 25 Hz, with 113 dB continuous.

Quantity
Supplier stock - 4 to 7 days

The minimum purchase order quantity for the product is 2.

Front of the PMC8-2 with two 200 mm bass drivers, midrange and tweeter

Two 200 mm bass drivers

The PMC8-2 is fitted with two 200 mm PMC studio 8 bass drivers, each powered by its own 400 W class D amplifier. The 55 mm PMC55 midrange and the 27 mm tweeter, both soft domes, also get 400 W each. The whole unit weighs 39 kg.

Pair of black three-way monitors in three-quarter view

3 m ATL line

The ATL line reaches an effective length of 3 m and opens onto hexagonal Laminair vents. It extends the response from 25 Hz to 25 kHz at -3 dB. The continuous level reaches 113 dB at 1 m and peaks 125 dB.

Monitor in profile view, on a column stand

Dedicated stands

At 55.1 cm wide, 53.4 cm high and 44 cm deep, the PMC8-2 sits on one of PMC's dedicated stands. The 40 inch model brings it to listening height, while the 19 inch model takes the XBD version. Its directivity of ±45° horizontally and ±50° vertically makes it easy to combine with the smaller models in the range.

Rear of the monitor with display, XLR sockets and network port

XBD upgrade

Adding a PMC8-2 SUB in XBD mode creates a two-cabinet system that gains up to 6 dB of bass headroom. Settings are made on the rear panel or with SoundAlign on a computer or tablet, via the RJ45 port. The XLR input accepts analogue or AES3 from 18 to 192 kHz.

Data sheet

Product Type
Active 3-way studio monitor with ATL bass loading
Features
Level trim ±10 dB, high-pass 20 - 200 Hz 12 dB/oct, delay 0 - 30 ms, normal or inverted phase, LF and HF shelving filters ±10 dB, 5-band parametric EQ, 3 user presets
Brand
PMC
Audio outputs
AES3 digital XLR (fixed 24-bit / 96 kHz)
Number of channels
3-way
Digital inputs
AES3 on XLR, 16/24-bit, 18 - 192 kHz, 110 Ω (left, right or left + right)
Analog inputs
XLR switchable analogue / AES3, +20/+24 dBu max. (selectable), 22 kΩ
Output power
LF 2 x 400 W RMS, MF 400 W RMS, HF 400 W RMS
Color
Black
Technology
ATL bass loading, Laminair vents
Network connectivity
RJ45 for the PMC SoundAlign web interface
Sensitivity
98 dB SPL at 1 m for +4 dBu input
Amplification technology
Class D
Power consumption
50 W idle, 1500 W max.
Tweeter
27 mm (1 in) soft dome
Midrange driver
PMC55 soft dome, 55 mm (2 in)
Woofer
2 x PMC studio 8, 200 mm (8 in)
Frequency response
25 Hz - 25 kHz (-3 dB)
Maximum SPL
113 dB continuous, 125 dB peak
Width
55.1 cm
Depth
44.0 cm
Height
53.4 cm
Unit weight
39.0 kg
New

This website uses cookies to ensure you get the best experience on our website