Void Acoustics Airten V3 in Geneva | Digistore.ch
Void Acoustics Airten V3 in Geneva | Digistore.ch
Void Acoustics Airten V3 in Geneva | Digistore.ch
    Void Acoustics Airten V3 in Geneva | Digistore.ch
    Void Acoustics Airten V3 in Geneva | Digistore.ch
    Void Acoustics Airten V3 in Geneva | Digistore.ch

Void Acoustics Airten V3 | Passive 2-way 2 x 10-inch PA speaker (each)

73392
CHF3,690.00 Tax included
Supplier stock – typically 4 to 7 days

The Void Acoustics Airten V3 passive PA speaker combines two 10-inch woofers and a coaxial transducer in a compact composite cabinet. It disperses 80° × 70° and mounts on T75-type brackets.

Color : Black
Quantity
Add to wishlist
Supplier delivery time usually between 4 and 7 days

The minimum purchase order quantity for the product is 2.

Red speakers hanging from the ceiling of a fitness room with mirrored walls

80° × 70° dispersion

The radiation pattern covers 80° horizontally and 70° vertically, spreading the sound evenly across the room. A coaxial transducer combines the midrange and the treble on the same axis, with a 1.3-inch compression driver. The maximum level reaches 125 dB continuous and 131 dB peak.

Pairs of black speakers on stands next to a DJ console in a lounge with red lighting

Compact DJ monitor

Two 10-inch woofers sit in a small-footprint cabinet designed for DJ stage monitoring. The response runs from 80 Hz to 20 kHz, with a sensitivity of 99 dB (1 W, 1 m). Nominal impedance is 4 Ω and power handling is 500 W AES.

Rear view of a turquoise speaker with its two ports and the connection plate

Connection and mounting

Two locking 4-pin connectors sit at the back of the cabinet, where a computer-optimised port limits noise and distortion. The T75-type mounting points accept many wall, ceiling, truss and pole brackets. Plan for a Bias Q1.5+ amplifier at minimum, and for two people to lift the 20 kg.

Red Void Acoustics Airten V3 speaker in front of a light concrete wall

Composite and finishes

The fibreglass composite cabinet has a geometry designed to reduce resonances, with a smooth cellulose finish. It comes in red, black or white, each with a matching grille, and RAL and KROME finishes are possible on request. It measures 681 × 303 × 366 mm and weighs 20 kg.

Black = Black; White = White; Red = Red
73392

Data sheet

Color
Red, black or white (RAL and KROME on request)
Nominal impedance
4 ohms
Sensitivity
99 dB 1W/1m
Tweeter
1 x 1.3 inch coaxial compression
Woofer
2 x 10 inch
Frequency response
80 Hz – 20 kHz
Recommended amplifier power
Bias Q1.5+
Connector
2 x 4-pin locking connector
Maximum SPL
125 dB continuous, 131 dB peak
Power handling
500 W AES
Width
68.1 cm
Depth
36.6 cm
Height
30.3 cm
Unit weight
20.0 kg
New

This website uses cookies to ensure you get the best experience on our website