NAD CI 8-120 DSP V2 | 8 x 120 W 4-Zone DSP Multi-Channel Amplifier | 3 YEAR WARRANTY

Name: NAD CI 8-120 DSP V2 | 8 x 120 W 4-Zone DSP Multi-Channel Amplifier | 3 YEAR WARRANTY
Brand: NAD
SKU: 73785
Price: 3290.00 CHF
Availability: BackOrder

Reference 73785

CHF3,290.00 Tax included

Supplier stock – typically 4 to 7 days

The NAD CI 8-120 DSP V2 is a 1U rack HybridDigital multi-channel amplifier that delivers 8 x 120 W into 8 ohms to four stereo zones. Its DSP, set up from a web interface, tailors each zone to the speakers and the room.

Description
Product Details

Installer sliding the multi-channel amplifier into an equipment rack

Power for four zones

The CI 8-120 DSP V2 delivers over 120 W per channel into 8 ohms with all eight channels driven, according to NAD's FDP power rating. In bridged mode it provides over 200 W per channel into 8 ohms, enough to drive architectural subwoofers. It therefore suits in-wall and in-ceiling speakers and medium to large rooms.

Black 1U rack amplifier seen from the front and above

DSP for every zone

The built-in DSP tailors the sound to the speakers and to each room, with adjustment of levels, tonal balance and crossovers for an integrated subwoofer. Peak and RMS limiters protect the drivers. Everything is set from a web interface whose dashboard shows the unit status, inputs and outputs and zone configuration in real time.

Rear panel: RCA inputs, line outputs, Phoenix terminals and power

HybridDigital amplification

The output stage is based on a customised version of the Hypex UcD module, at the heart of NAD's HybridDigital technology. Its efficiency limits heat and power consumption, and distortion stays below 0.05 % from 1 to 100 W. Peak current exceeds 20 A to keep control of hard-to-drive speakers.

Black front panel with rack ears, air vents and zone indicators

1U rack integration

The 1U-high chassis takes up little room in the equipment rack. It switches on when it detects an audio signal or receives a 3 to 30 V trigger voltage, then draws 0.5 W in standby. IR inputs and outputs make control from the home automation system easier.

Reference 73785

Data sheet

Product Type: Multichannel DSP amplifier
Power Amplifier
Features: Audio sense threshold: 3 ± 0.5 mVrms (100 Hz - 10 kHz)
Automatic turn-on (Auto Sense)
Built-in DSP: per-zone tuning, peak and RMS limiters, subwoofer crossovers
Damping factor: over 110 (8 Ω, 20 Hz to 6.5 kHz)
Maximum undistorted input level: 2900 mV
Peak output current: over 20 A (1 Ω, 1 ms)
Setup through a web interface with a real-time dashboard
Brand: NAD
Integrated DAC: No
Number of channels: 8
8 channels / 4 zones
Output power: Bridged IHF dynamic power: 440 W (8 Ω, all channels)
Bridged IHF dynamic power: 480 W (8 Ω, two channels)
Bridged clipping power: over 300 W (8 Ω, 1 kHz, 0.1 % THD, all channels)
Clipping power: over 130 W (1 kHz, 8 Ω, 0.1 % THD, all channels)
IHF dynamic power: 125 W (8 Ω, all channels)
IHF dynamic power: 145 W (8 Ω, two channels)
Over 120 W per channel (8 Ω, all channels driven)
Over 135 W per channel (4 Ω, all channels driven)
Over 200 W in bridged mode (8 Ω, all channels driven)
Series: Classic
Sensitivity: 1150 mV (for 120 W into 8 Ω, maximum volume)
Installation type: 19" rack mount
Connections: 3 - 30 V DC trigger input
Remote IR in and out 1 / 1
Trigger 12 V
Installation format: 1U
Amplification technology: Custom HybridDigital UcD, stereo and bridged modes
Signal-to-noise ratio: Over 88 dB (A-weighted, 500 mV input, ref. 1 W into 8 Ω)
Power consumption: 0.5 W standby
Frequency response: ±0.5 dB (20 Hz - 20 kHz)
Séparation des canaux: Over 70 dB (1 kHz)
Distortion (THD): Less than 0.05 % (1 W to 100 W, 8 and 4 Ω)
Width: 48.3 cm
Depth: 43.5 cm
Height: 4.5 cm