PMC twenty5.24i Active | Active floorstanding speaker (pair)

73990
CHF9,590.00 Tax included
Supplier stock – typically 4 to 7 days

The PMC twenty5.24i Active is the largest active floorstanding speaker in the range, a 2-way design with two 100 W amplifiers. Its 3 m ATL transmission line reaches down to 27 Hz.

Quantity
Supplier stock - 4 to 7 days

Gloss black floorstanding speaker in an open-plan kitchen, near a bar stool and a rug

The largest active tower

The twenty5.24i is the largest model in the Active twenty5i range. This two-way design is built to fill large listening rooms. Its cabinet measures 101.5 cm high, 19.2 cm wide and 41.9 cm deep, with 27.5 cm plinth bars. It weighs 23.15 kg. The spikes add 20 mm to the height and the grille 9 mm to the depth.

Brushed aluminium rear panel with sockets and model marking, angled view on a walnut cabinet

Built-in active amplification

Each tower houses two 100 W RMS amplifiers, one per driver, placed after an active crossover. Just connect a preamplifier or a streamer with volume control, with no separate power amplifier. The rear panel brings together a balanced XLR input and an unbalanced RCA input. Two sensitivity levels are selectable: 99 dB or 109 dB at 1 m for 1 Vrms.

Brushed aluminium rear plate marked active twenty5, angled view on a walnut cabinet

3 m ATL line

The 170 mm (6.5 inch) long-excursion bass driver with a g-weave cone sits on a cast alloy chassis. It loads an ATL transmission line of 3 m effective length, which exits through a Laminair vent. The response thus reaches down to 27 Hz. PMC compares its bass to that of a larger three-way speaker.

Top of two walnut floorstanding speakers, seen from the front and the back

19 mm SONOMEX tweeter

Treble is handled by a 19 mm PMC/SEAS soft dome in SONOMEX fabric, cooled by ferrofluid, with a 34 mm surround and a dispersion grille. The active crossover hands it the signal from 1.9 kHz. Tweeter and 170 mm bass driver blend seamlessly, and the response extends up to 25 kHz.

Light Wood = Oak
73990

Data sheet

Product Type
2-way active floorstanding speaker
Brand
PMC
Analog inputs
Balanced XLR and unbalanced RCA
Output power
2 x 100 W RMS per speaker (HF 100 W, LF 100 W)
Color
Oak, Walnut, Diamond Black
Technology
Advanced Transmission Line (ATL), effective length 3 m, Laminair vent
Series
Active twenty5i
Nominal impedance
Input impedance above 14 kOhm
Sensitivity
99 dB SPL at 1 m for 1 Vrms (low setting) / 109 dB (high setting)
Amplification technology
Active bi-amplification, active crossover
Tweeter
PMC/SEAS 19 mm SONOMEX fabric soft dome, ferrofluid cooled, 34 mm surround, dispersion grille
Woofer
1 × 170 mm (6.5 in) long-throw g-weave cone, cast alloy chassis
Frequency response
27 Hz - 25 kHz
Width
27.5 cm
Depth
41.9 cm
Height
101.5 cm
Unit weight
23.15 kg
New

This website uses cookies to ensure you get the best experience on our website