- New


A 6N2 tube equips the analogue output stage of the player. Distortion stays below 0.005 % and the signal-to-noise ratio exceeds 93 dB. Quoted dynamic range passes 100 dB.

The converter handles signals at 24 bits and 192 kHz. Audio output voltage is 2.5 V and channel separation exceeds 80 dB. Bandwidth covers 20 Hz to 20 kHz at ±1 dB.

A 6.35 mm jack headphone output sits on the front panel, with 100 ohm impedance and 160 mW into 300 ohms. RCA, optical and coaxial outputs connect an amplifier or an external converter. The case measures only 21 x 9.5 x 30.5 cm and weighs 4 kg.

The player comes in black and silver, in a 21 x 9.5 x 30.5 cm format weighing 4 kg. Maximum consumption is 25 watts. The headphone output and level control sit on the front panel.
Data sheet
Specific References
• Lower-dispersion higher-purity fiber
• Low-jitter (Digital Timing Errors)
• Precision Polished Fiber Ends
• 3 METER AND ABOVE IN-WALL Rated PVC
• 280 Narrow-Aperture Quartz (Fused-Silica) Fibers
• Low-jitter (Digital Timing Errors)
• Precision Polished Fiber Ends
• 3 METER AND ABOVE IN-WALL Rated PVC
This website uses cookies to ensure you get the best experience on our website