PMC PMC8 SUB | Active studio subwoofer

CHF3,190.00 Tax included
Supplier stock – typically 4 to 7 days

The PMC PMC8 SUB is an active studio subwoofer with ATL loading. Its 200 mm driver and 300 W amplifier reach down to 25 Hz, on their own or under a PMC6 in XBD mode.

Quantity
Supplier stock - 4 to 7 days

Front of the PMC8 SUB subwoofer, 200 mm driver and hexagonal vent

200 mm ATL-loaded bass

The PMC8 SUB uses a 200 mm long-excursion PMC studio 8 driver loaded by an ATL line. The response extends from 25 Hz to 500 Hz at -3 dB, for 109 dB continuous and 121 dB peak at 1 m. A 300 W RMS class D amplifier drives it.

Side of the subwoofer, matt black cabinet

Foundation of the PMC6 XBD

Placed under a PMC6, the subwoofer forms the PMC6 XBD once XBD mode is enabled in the DSP. It also serves as a standalone subwoofer in a multichannel or immersive system, where the gentle ATL roll-off makes it easier to blend with the height and surround channels. The cabinet measures 55.1 cm wide, 26.6 cm high and 44 cm deep, and weighs 18.5 kg.

Rear of the subwoofer with display, XLR sockets and RJ45 port

DSP settings and SoundAlign

On the rear panel you reach the high-pass and low-pass filters from 20 to 200 Hz, delay up to 30 ms, phase and the 5-band parametric equaliser. The same settings are available in SoundAlign via the RJ45 port. The XLR input accepts analogue or AES3, and an AES3 output passes the signal on.

Close-up of the front, bass driver and hexagonal grille

Level, filters and presets

The level adjusts from -10 to +10 dB. Bass and treble shelving filters of ±10 dB complement the parametric equaliser. Three user presets sit alongside the factory settings, and latency stays at 2.4 ms.

Data sheet

Product Type
Active studio subwoofer with ATL bass loading
Features
Level trim ±10 dB, high-pass / low-pass 20 - 200 Hz 12 dB/oct, delay 0 - 30 ms, normal or inverted phase, LF and HF shelving filters ±10 dB, 5-band parametric EQ, 3 user presets, XBD mode
Brand
PMC
Audio outputs
AES3 digital XLR (fixed 24-bit / 96 kHz)
Digital inputs
AES3 on XLR, 16/24-bit, 18 - 192 kHz, 110 Ω (left, right or left + right)
Analog inputs
XLR switchable analogue / AES3, +20/+24 dBu max. (selectable), 22 kΩ
Output power
300 W RMS
Technology
ATL bass loading
Network connectivity
RJ45 for the PMC SoundAlign web interface
Amplification technology
Class D
Power consumption
25 W idle, 300 W max.
Woofer
PMC studio 8, 200 mm (8 in)
Frequency response
25 Hz - 500 Hz (-3 dB)
Maximum SPL
109 dB continuous, 121 dB peak
Width
55.1 cm
Depth
44.0 cm
Height
26.6 cm
Unit weight
18.5 kg
New

This website uses cookies to ensure you get the best experience on our website