Pro-Ject Amp Box DS2 | Stereo power amplifier

Name: Pro-Ject Amp Box DS2 | Stereo power amplifier
Brand: Pro-ject
Price: 699.00 CHF
Availability: BackOrder

Reference 63537

CHF699.00 Tax included

Supplier stock – typically 4 to 7 days

Pro-Ject Amp Box DS2, a compact class D stereo power amplifier delivering 2 x 140 W into 4 ohms. Efficient and cool-running, it drives demanding speakers in a living room.

Color : Black

Black
Silver

Quantity

Add to wishlist

Supplier delivery time usually 4 to 7 days

Description
Product Details

Black version seen from a three-quarter angle

Efficient class D module

At the heart of the Amp Box DS2 is a high-efficiency class D module that uses little energy and runs cool. It delivers 2 x 100 W into 8 ohms and 2 x 140 W into 4 ohms, enough to drive demanding speakers. Its response stays independent of the load, with low output impedance.

Silver version seen from a three-quarter angle on a white background

Measurements and tube reference

Bandwidth extends from 10 Hz to 50 kHz, and distortion stays below 0.1% at 90 W. Pro-Ject uses the sound of tube amplifiers as the benchmark for its amps. A four-layer circuit board shortens the signal paths compared with the previous model.

Black version seen from the front on a white background

Connections and trigger

An RCA input with 550 mV sensitivity takes the preamp, and an RCA loop output passes the signal on to another unit. The isolated terminals accept 4 mm banana plugs, spades or bare wire. A 12 V trigger input and loop output handles switching on.

Silver rear panel with RCA input, trigger and speaker terminals

Aluminium and metal case

The aluminium and metal sandwich case protects against vibration. In its aluminium version it measures 20.6 x 6.8 x 19.4 cm and weighs 1.67 kg. Magnetic side panels in rosenut, walnut or eucalyptus are sold separately, and the Power Box DS2 Amp supply can take it further.

Black = Black; Silver = Silver

Reference 63537

Data sheet

Product Type: Power Amplifier
Features: Input impedance: 10 kohms
Input sensitivity: 550 mV
Noise floor: more than -90 dB
Outboard power supply: 48 V / 2.5 A DC, 100 - 240 V, 50/60 Hz
Speaker outputs: 4 mm banana plugs, spades or bare wire
Wood side panel version (optional): 240 x 69 x 194 mm, 2130 g without power supply
Brand: Pro-Ject
Audio outputs: RCA loop output
Analog inputs: 1 pair RCA
Output power: 2 x 100 W / 140 W at 8 / 4 ohms
Color: Black
Silver
Connections: 12 V trigger (2-pole coaxial jack)
Amplification technology: Class D
Power consumption: less than 1 W in standby
Frequency response: 10 Hz - 50 kHz (+0 dB, -3 dB)
Distortion (THD): less than 0.1% at 90 W
Width: 20.6 cm
Depth: 19.4 cm
Height: 6.8 cm
Unit weight: 1.67 kg