Wharfedale ELYSIAN 2R | 3-way bookshelf speaker (each)

73463
CHF2,899.00 Tax included
Supplier stock – typically 4 to 7 days

The Wharfedale ELYSIAN 2R is a three-way bass-reflex bookshelf speaker with an 8.5-inch woofer, a 6-inch midrange driver and an AMT tweeter. It covers 35 Hz to 22 kHz (±3 dB) and is sold individually.

Color : Gray
Quantity
Supplier delivery time usually 4 to 7 days

The minimum purchase order quantity for the product is 2.

ELYSIAN 2R speakers in grey, light walnut and black finishes, placed on stands

Three stacked drivers

Three drivers stacked on the front share the spectrum: an 8.5-inch woofer, a 6-inch midrange driver and a 27 × 90 mm AMT tweeter. The crossover points fall at 360 Hz and 2.9 kHz. The response extends from 35 Hz to 22 kHz (±3 dB), with bass extension of 28 Hz at -6 dB. The speaker comes in black, grey and light walnut.

Close-up of the 8.5-inch woofer in a grey finish and its base

Glass-fibre cones

The 8.5-inch (220 mm) woofer and the 6-inch (150 mm) midrange driver each use a coated glass-fibre matrix cone. The bass-reflex cabinet has quoted volumes of 17.5 L and 43.6 L. It measures 700 × 334 mm on its base and weighs 30.5 kg.

Two grey speakers on stands, one from the front with its three drivers, the other from behind with its terminals

27 × 90 mm AMT tweeter

The AMT tweeter sits at the top of the front baffle, above the midrange driver. It takes over from 2.9 kHz, the crossover point with the midrange driver. The connection terminals are on the back of the cabinet.

Two grey speakers on stands on either side of a low cabinet holding an amplifier and a turntable

Load and amplification

The nominal impedance is 4 Ω, compatible with 8 Ω, with a minimum of 3.6 Ω. Sensitivity reaches 89 dB (2.83 V, 1 m). Drive the speaker with an amplifier rated 25 to 250 W, for a peak level of 109 dB.

Black = Black; Gray = Grey; Walnut = Light Walnut
73463

Data sheet

Product Type
3-way bass-reflex bookshelf speaker
Technology
Bass-reflex design
Nominal impedance
4 Ω (compatible with 8 Ω, minimum 3.6 Ω)
Sensitivity
89 dB (2.83 V, 1 m)
Tweeter
27 x 90 mm AMT
Midrange driver
150 mm (6 in) coated glass fibre matrix cone
Woofer
220 mm (8.5 in) coated glass fibre matrix cone
Frequency response
35 Hz – 22 kHz (±3 dB)
Recommended amplifier power
25 – 250 W
Maximum SPL
109 dB
Width
33.4 cm
Depth
46.2 cm
Height
70 cm
Unit weight
30.5 kg

Specific References

EAN13
6978698284344
New

This website uses cookies to ensure you get the best experience on our website