Void Acoustics Air Vantage V2 in Geneva | Digistore.ch
Void Acoustics Air Vantage V2 in Geneva | Digistore.ch
Void Acoustics Air Vantage V2 in Geneva | Digistore.ch
    Void Acoustics Air Vantage V2 in Geneva | Digistore.ch
    Void Acoustics Air Vantage V2 in Geneva | Digistore.ch
    Void Acoustics Air Vantage V2 in Geneva | Digistore.ch

Void Acoustics Air Vantage V2 | Passive 2-way 12-inch PA speaker (each)

73396
CHF5,990.00 Tax included
Supplier stock – typically 4 to 7 days

The Void Acoustics Air Vantage V2 passive PA speaker pairs a 12-inch coaxial driver with a horn load. Its 70° × 40° dispersion suits venues, festivals and DJ monitoring.

Color : White
Quantity
Add to wishlist
Supplier delivery time usually between 4 and 7 days

The minimum purchase order quantity for the product is 2.

Close-up of the horn and coaxial driver of a white speaker

12-inch coaxial

A 12-inch woofer and a 1.5-inch coaxial driver radiate from the same point. The horn loading delivers high efficiency, with a sensitivity of 100 dB (1 W, 1 m). The response runs from 170 Hz to 20 kHz: the speaker handles the midrange and treble above the subwoofers.

DJ booth on a festival stage with red horn speakers used as monitors

70° × 40° dispersion

The waveguide, optimised by finite element analysis, controls directivity down into the low frequencies. Coverage stays constant over 70° horizontally and 40° vertically. The maximum level reaches 126 dB continuous and 132 dB peak, for 500 W AES at 8 Ω. The speaker also serves as an on-stage DJ monitor.

Club room fitted with suspended horn speakers and subwoofers

Mounting and connection

The T75-type mounting points accept wall, ceiling, truss and pole brackets. Two locking 4-pin connectors make line wiring easier. The Bias Q1.5+ is the minimum recommended amplifier, with a dedicated FIR preset. At 23.5 kg, the speaker takes two people to lift.

Red horn speaker standing on a light concrete floor

Composite and finishes

The low-resonance fibreglass composite cabinet limits vibration at high levels. Its smooth cellulose finish comes as standard in red with a black grille, black with a black grille or white with a white grille. RAL and KROME finishes are available on request. The speaker measures 719 × 415 × 660 mm.

Black = Black; White = White; Red = Red
73396

Data sheet

Color
Red, Black, White, RAL, KROME
Nominal impedance
8 Ω
Sensitivity
100 dB (1 W, 1 m)
Installation type
Type 75 plate
Connections
2 x 4-pin locking connector
Woofer
1 x 12″ LF, 1 x 1.5″ coaxial
Frequency response
170 Hz – 20 kHz
Recommended amplifier power
Bias Q1.5+
Maximum SPL
126 dB cont, 132 dB peak
Power handling
500 W AES
Width
71.9 cm
Depth
66.0 cm
Height
41.5 cm
Unit weight
23.5 kg
New

This website uses cookies to ensure you get the best experience on our website