Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch
    Void Acoustics Air 8.1 in Geneva | Digistore.ch

Void Acoustics Air 8.1 | Passive 2-way 8-inch PA speaker (each)

73389
CHF1,390.00 Tax included
Supplier stock – typically 4 to 7 days

The Void Acoustics Air 8.1 passive PA speaker pairs an 8-inch coaxial driver with an aluminium waveguide. It mounts on the wall with the supplied T51 bracket and covers an 80° × 80° cone.

Color : Black
Quantity
Add to wishlist
Supplier delivery time usually between 4 and 7 days

The minimum purchase order quantity for the product is 2.

Red Void Acoustics Air 8.1 speaker in front of a light concrete wall

8-inch coaxial

An 8-inch woofer and a 1-inch driver share the same axis. This point source gives coherent directivity and an even sound across the whole listening area. The response runs from 80 Hz to 20 kHz, with a sensitivity of 95 dB (1 W, 1 m).

Red speaker with a black grille mounted on a colourful wall in a Barcelona restaurant

80° × 80° conical dispersion

The conical radiation pattern covers 80° horizontally and vertically. An aluminium waveguide limits thermal compression and preserves dynamics at sustained volume. The maximum level reaches 119 dB continuous and 125 dB peak, and the speaker handles 300 W AES at 8 Ω.

Phoenix connector and mounting plate on the back of the speaker

Connection and mounting

The four-terminal Phoenix screw connector locks onto the cabinet: one pair takes the signal, the other passes it on to the next speaker. You can therefore pre-wire the line before installation. A T51 wall bracket is supplied, and the threaded inserts also accept the T51 ceiling, truss and pole brackets.

Speaker with a black grille in a custom turquoise RAL finish

Composite shell, RAL finishes

The low-resonance fibreglass composite cabinet has a smooth cellulose finish. It measures 419 × 300 × 172 mm and weighs 6.2 kg. The range comes as standard in red, black or white, and RAL and KROME finishes are available on request.

Black = Black; White = White; Red = Red
73389

Data sheet

Color
Black, White, Red
Nominal impedance
8 Ω
Sensitivity
95 dB (1 W / 1 m)
Installation type
Wall mount included, Type 51 plate
Connections
Phoenix connector with link output
Woofer
1 x 8″ LF, 1 x 1″ coaxial
Frequency response
80 Hz – 20 kHz
Recommended amplifier power
Bias Q1+
Maximum SPL
119 dB cont., 125 dB peak
Power handling
300 W AES
Width
30.0 cm
Depth
17.2 cm
Height
41.9 cm
Unit weight
6.2 kg
New

This website uses cookies to ensure you get the best experience on our website