PMC twenty5.23i Active | Active floorstanding speaker (pair)

73989
CHF7,190.00 Tax included
Supplier stock – typically 4 to 7 days

The PMC twenty5.23i Active is an active 2-way floorstanding speaker with two 100 W amplifiers per speaker. Its 2.4 m ATL transmission line reaches down to 28 Hz, for medium-sized rooms.

Color : Walnut
Quantity
Supplier stock - 4 to 7 days

Two walnut floorstanding speakers in a bright living room, near a round table and a pendant lamp

Slender active tower

The twenty5.23i takes the best-selling passive model of the twenty5i range and builds its amplification in. The cabinet measures 90.7 cm high, 16.2 cm wide and 33 cm deep, and its plinth bars widen the base to 23.8 cm. It weighs 15.15 kg and is aimed at medium-sized rooms. 20 mm spikes and a 9 mm grille complete the package.

Brushed aluminium rear plate marked active twenty5, angled view on a walnut cabinet

Built-in active amplification

Each tower houses two 100 W RMS amplifiers, one per driver, placed after an active crossover. Just connect a preamplifier or a streamer with volume control, with no separate power amplifier. The rear panel brings together a balanced XLR input and an unbalanced RCA input. Two sensitivity levels are selectable: 96.5 dB or 106.5 dB at 1 m for 1 Vrms.

Close-up of a soft dome tweeter behind its dispersion grille, on a walnut front

19 mm SONOMEX tweeter

Treble is handled by a 19 mm PMC/SEAS soft dome in SONOMEX fabric, cooled by ferrofluid. Its 34 mm surround and dispersion grille widen the dispersion. The active crossover hands it the signal from 1.75 kHz, and the response extends up to 25 kHz.

Top of two walnut floorstanding speakers, seen from the front and the back

2.4 m ATL line

The 140 mm (5.5 inch) long-excursion bass driver with a g-weave cone sits on a cast alloy chassis. It loads an ATL transmission line of 2.4 m effective length, which exits through a Laminair vent. The response thus reaches down to 28 Hz. The bass extends deep without needing a subwoofer.

Light Wood = Oak; Walnut = Walnut
73989

Data sheet

Product Type
2-way active floorstanding speaker
Brand
PMC
Analog inputs
Balanced XLR and unbalanced RCA
Output power
2 x 100 W RMS per speaker (HF 100 W, LF 100 W)
Color
Oak, Walnut, Diamond Black
Technology
Advanced Transmission Line (ATL), effective length 2.4 m, Laminair vent
Series
Active twenty5i
Nominal impedance
Input impedance above 14 kOhm
Sensitivity
96.5 dB SPL at 1 m for 1 Vrms (low setting) / 106.5 dB (high setting)
Amplification technology
Active bi-amplification, active crossover
Tweeter
PMC/SEAS 19 mm SONOMEX fabric soft dome, ferrofluid cooled, 34 mm surround, dispersion grille
Woofer
1 × 140 mm (5.5 in) long-throw g-weave cone, cast alloy chassis
Frequency response
28 Hz - 25 kHz
Width
23.8 cm
Depth
33.0 cm
Height
90.7 cm
Unit weight
15.15 kg
New

This website uses cookies to ensure you get the best experience on our website