Wharfedale EVO 5.3 | 3-Way Floorstanding Speaker (each)

73526
CHF749.00 Tax included
Supplier stock – typically 4 to 7 days

The Wharfedale EVO 5.3 is a three-way bass-reflex floorstanding speaker with two 5 inch woofers, a 2 inch midrange and an AMT tweeter. It covers 46 Hz to 24 kHz (±3 dB) and is sold individually.

Color : White
Quantity
Supplier delivery time usually 4 to 7 days

The minimum purchase order quantity for the product is 2.

Upper part of a walnut floorstanding speaker with its AMT tweeter, midrange and a woofer

Three-way column

The EVO 5.3 combines two 5 inch (130 mm) woofers in black woven Kevlar, a 2 inch (50 mm) soft-dome midrange and a 35 × 70 mm AMT tweeter. The crossover points are 825 Hz and then 4 kHz. Response extends from 46 Hz to 24 kHz (±3 dB), with bass extension down to 40 Hz at -6 dB. It comes in black, white, grey and walnut.

Close-up of the terminals, plinth and woofers of a white floorstanding speaker

Woofers and slot port

The two 5 inch woofers work in a 35.4 litre bass-reflex cabinet. The three-way SLPP slot port spreads the air output at the base to limit turbulence. A hybrid plinth, in metal and wood, strengthens the whole assembly on its feet.

Upper part of a grey floorstanding speaker seen from the front with its AMT tweeter

AMT tweeter

The 35 × 70 mm AMT tweeter drives a pleated diaphragm between two magnets instead of pushing a dome. Behind the diaphragm, Silentweave absorbs reflections, and the elastomer ResoFrame damps the drivers of the range. This tweeter operates above 4 kHz.

Rear of a black floorstanding speaker with its binding posts and its plinth on feet

Load and amplification

Nominal impedance is 4 Ω, compatible with 8 Ω, with a minimum of 3.5 Ω. Sensitivity reaches 88 dB (2.83 V, 1 m) and peak level 106 dB. Choose an amplifier of 25 to 150 W. At 933 mm high on its plinth, the speaker weighs 21.5 kg.

Black = Black; White = White; Gray = Grey; Walnut = Walnut
73526

Data sheet

Product Type
3-way bass-reflex floorstanding loudspeaker
Technology
Bass-reflex design
Nominal impedance
4 Ω (compatible with 8 Ω, minimum 3.5 Ω)
Sensitivity
88 dB (2.83 V, 1 m)
Tweeter
AMT 35 × 70 mm
Midrange driver
50 mm (2 in) soft dome
Woofer
2 × 130 mm (5 in) black woven Kevlar cone
Frequency response
46 Hz – 24 kHz (±3 dB)
Recommended amplifier power
25 - 150 W
Maximum SPL
106 dB
Width
26.6 cm
Depth
32.5 cm
Height
93.3 cm
Unit weight
21.5 kg

Specific References

EAN13
6977322664941
New

This website uses cookies to ensure you get the best experience on our website