Ruark Audio Talisman-R in Geneva | Digistore.ch
Ruark Audio Talisman-R in Geneva | Digistore.ch
Ruark Audio Talisman-R in Geneva | Digistore.ch
Ruark Audio Talisman-R in Geneva | Digistore.ch
    Ruark Audio Talisman-R in Geneva | Digistore.ch
    Ruark Audio Talisman-R in Geneva | Digistore.ch
    Ruark Audio Talisman-R in Geneva | Digistore.ch
    Ruark Audio Talisman-R in Geneva | Digistore.ch

Ruark Audio Talisman-R | 2-Way Bass-Reflex Floorstanding Speaker (each)

73330
CHF845.00 Tax included
Supplier stock – typically 4 to 7 days
Ruark Audio Talisman-R two-way bass-reflex floorstanding speaker: 27 mm silk tweeter and 170 mm NS+ driver, 40 Hz to 22 kHz, 87 dB, 6 ohms. Sold individually, minimum order of two.
Color : Walnut
Quantity
Add to wishlist
Supplier delivery time usually 4 to 7 days

The minimum purchase order quantity for the product is 2.

Pair of Ruark Audio Talisman-R floorstanding speakers in a living room

Two-Way Floorstander

The Talisman-R pairs a 27 mm silk dome tweeter on a neodymium motor with a 170 mm NS+ driver developed by Ruark. An optimised second-order crossover joins them at 2.2 kHz, using audio film capacitors and low-loss inductors. Response runs from 40 Hz to 22 kHz under real in-room conditions.

Floorstanding speaker beside a light wood sideboard

170 mm NS+ Driver

The bass-mid driver carries the treated fibre cone of the NS+ series. Its two-layer copper voice coil measures 35 mm and works in a strontium ferrite motor. Sensitivity of 87 dB at 2.83 V and 1 m and a nominal impedance of 6 ohms, with a 3.8 ohm minimum at 5 kHz, leave room for an amplifier of 50 to 250 W.

Floorstanding speakers either side of a sideboard, in front of a picture window

Dual-Ported Cabinet

The 14.5 litre bass-reflex cabinet is tuned to 42 Hz and breathes through two flared ports. The baffle is decoupled from the enclosure to limit the vibration the driver passes into it. Each speaker measures 850 x 210 x 250 mm and weighs 17.6 kg.

Pair of speakers in front of a polished concrete staircase

Terminals and Setup

The gold-plated multi-way binding posts accept banana plugs, spades or bare wire, in single or bi-wire configuration. Decoupling spikes and adjustable rubber feet are supplied to level the cabinet on wood or carpet. The baffle comes in Fused Walnut or Satin Charcoal, always on a charcoal enclosure with a mottled fabric grille. Sold individually, with a minimum order of two.

Walnut = Fused Walnut; Black = Satin Charcoal
73330

Data sheet

Product Type
Tower Speaker
Nominal impedance
6 Ω (minimum 3,8 Ω à 5 kHz)
Sensitivity
87 dB (2.83 V / 1 m)
Connections
Bornier double 4 mm doré, câblage simple ou bi-câblage (bananes, fourches ou fil nu)
Tweeter
Dôme soie 27 mm à moteur néodyme
Woofer
NS+ 170 mm, membrane fibre traitée, bobine cuivre 2 couches 35 mm, moteur ferrite de strontium
Frequency response
40 Hz – 22 kHz (typique en pièce)
Recommended amplifier power
50 – 250 W
Width
21.0
Depth
25.0
Height
85.0
Unit weight
17.6
New

Complete your speakers

This website uses cookies to ensure you get the best experience on our website