KEF Reference 5 Meta in Geneva | Digistore.ch
KEF Reference 5 Meta in Geneva | Digistore.ch
KEF Reference 5 Meta in Geneva | Digistore.ch
KEF Reference 5 Meta in Geneva | Digistore.ch
    KEF Reference 5 Meta in Geneva | Digistore.ch
    KEF Reference 5 Meta in Geneva | Digistore.ch
    KEF Reference 5 Meta in Geneva | Digistore.ch
    KEF Reference 5 Meta in Geneva | Digistore.ch

KEF Reference 5 Meta | High-End Floorstanding Speaker (piece)

67639
CHF12,000.00 Tax included
Supplier stock – typically 4 to 7 days
KEF Reference 5 Meta three-way floorstanding speaker, 12th-generation coaxial Uni-Q driver and four 165 mm bass drivers. It covers 40 Hz to 35 kHz within plus or minus 3 dB and reaches 25 Hz in typical in-room response, with no added subwoofer.
Color : Dark Wood
Quantity
Add to wishlist
Supplier stock – typically 4 to 7 days

The minimum purchase order quantity for the product is 2.

White KEF Reference 5 Meta floorstanding speakers either side of a sideboard

12th-generation Uni-Q

The 25 mm aluminium dome tweeter sits at the acoustic centre of the 125 mm midrange cone. Both ways radiate from a single point and spread the sound evenly through the room, which erases the single listening spot: the central armchair loses its privilege. The crossover hands over at 450 Hz, then at 2.1 kHz.

Three-way floorstanding speaker seen from three quarters, gloss white finish

Metamaterial absorption

A tweeter also radiates backwards, and that energy comes back to disturb the midrange. Behind the dome, a maze structure traps it: its tuned channels absorb 99 % of the unwanted sound, where the usual treatments top out around 60 %. The top of the spectrum gains in clarity.

Floorstanding speaker seen from three quarters, gloss black finish

Four 165 mm bass drivers

Four aluminium cones of 165 mm load a bass-reflex volume. Depending on the port fitted, extension goes down to 35 or 32 Hz at -6 dB, and the typical in-room response reaches 25 Hz — low enough to do without a subwoofer on most material. Bandwidth covers 40 Hz to 35 kHz at plus or minus 3 dB.

Rear panel with binding posts and tuning port

0.5 dB pair matching

The cabinet leaves the Maidstone factory, in Kent, where KEF has built its speakers since 1961 and assembles the Reference by hand. Each pair is matched to within 0.5 dB of the reference standard kept in the laboratory. The 60.2 kg per speaker and the 4 ohm load, minimum 3.2, call for an amplification of 50 to 400 W; maximum pressure then reaches 116 dB at one metre.

67639

Data sheet

Product Type
Tower Speaker
Nominal impedance
4 Ω (minimum 3.2 Ω)
Sensitivity
88 dB (2.83 V / 1 m)
Width
32.3 cm
Depth
46.7 cm
Height
140.2 cm
Unit weight
60.2 kg

Specific References

UPC
67639
EAN13
637203048722
New

Complete your speakers

This website uses cookies to ensure you get the best experience on our website