TECHNICAL SPECIFICATIONS
Format:
Closed box, vibration speaker configuration, MDF construction 25mm with internal reinforcements and closed amplification compartment
Low Limit Frequencies (-6db – IEC 268-13:)
-3db @ 23hz / -10db @ 18hz (open space) pre-adjustment music, -3db @ 19hz / -10db @ 16hz (in room) pre-adjustment music, limited by low frequency protection filter (-3db @ 12Hz)
High frequency limit: -3db @ 150hz
Speakers:
2 x WOOFER C-CAM® 38CM with inverted and triple suspension surround for a better outdoor surround.
8Cm rectangular wire coil with black anodized ced perforations and engine to reduce power compression and increase thermal dissipation.
Cone, magnetic elements and optimized suspensions Fea for optimal performance and better linearity.
Linear Excursion Speakers: 42mm peak ridge, total trip 6.4 liters
Amplifying power output:
Dual amplifier design, one by speaker
Combined power 1400W RMS, 2000W peak (ratio 1: 4 continuously, measured in two loads 4 OHM non-reactive)
Amplification class:
2 x Class D amplifiers, differential balanced input, differential power supply, DSP control. Automatic power supply mode (SMPSU)
DSP:
172MHz, DSP Heart With 3500 Instructions by Sample, Dynamic Range 139DB and Processing 56-bit Double Precision, Dynamic Update by MCU 80MHz
Digital conversion: Wolfson Microelectronics (Cirrus Logic) ADC & DAC @ 24bit / 48KHz (WM8786 ADC & WM8740 DAC)
LED Control Panel UI: Adjustable brightness 0% / 100%, auto Off parameterizable. Quick access to functions: TRIM, LDF, Phase, Preset Select
Main settings (via subconnect:)
Brightness Display (0-100%), Low Light (50% off), Default Pre-settings, Mute Output, Trigger 12V Assign (Power On / off or Preset Selection), Input Gain (Master -80 to + 20dB, Trim -6 to + 6dB, Mute), Phase (0-360 pairs of 15 degrees), Night Mode Threshold (-2db to -20db), Auto On / Off (Activation Signal Detector, Always On, Auto Standby 5 to 240 minutes)
Pre-settings users (via subconnect:)
4 fully customizable pre-settings, with Pre-adjustment Name, LPF Frequency (LPF Lamps), LPF Slope (-12 or -24dB / OCT), Input (Stereo, LFE, Both), Trim Offset (-6 to + 6dB), EQ Mode (Impact, Music, Movie, Default), Custom EQ (6 Adjustable Filters In addition to the EQ mode), Room Correction (ON / OFF), Night Mode (ON / OFF)
Customized equalization: 6 controllable EQ filters and 6 default filters with pre-adjustment gain Default settings: Flat / Music / Movie / Impact
EQ room correction:
6 eQ filters controlled by the system and calibrated with an advanced detection algorithm.Mesures made from the control panel or subconnect, with up to 6 microphone locations (2 by default)
Night mode:
Assignable Night Mode (ON or OFF) by pre-adjustment with global threshold (-2db to -20db) Dynamic range reduction to lower the level of strong sections
Phase control: 0-360 degrees, 15 degree bearings and pure reversal 180 degrees
Low pass filter: 2nd or 4th order (12 or 24dB / octave), 5Hz threshold of 35Hz at 135Hz
Required level for input detection: Level> 1mV on balanced and unbalanced entrances Auto Standby Adjustable 5 minutes from 5 to 240 minutes
Digital volume control: -11 to + 11dB by 1DB levels via the control panel. -80 to + 20dB by subconnect application
Infrared control code: Remote control provided, IR receiver in front with red LED return. Complementary IR codes available in the manual
SubConnect (PC Software:)
Windows compatible (7 or more recent, 32 / 64bit), software available on the website Monitor Audio or on the USB key of Tool Kit Platinum II. Provides access to advanced subwoofer settings. Ability to save offline changes for off-site intervention
Connectivity Entry: The balanced (XLR) and unbalanced (RCA), unbalanced stereo (RCA) (RCA). Assignable entries with each preset.
CONNECTIC CONTROL / settings:
Trigger 12V (mini jack 3.5mm, threshold 6V), assignable to ON / OFF or pre-adjustment change; 3.5mm jack input for micro calibration (supplied); RJ45 connector RS232 compatible (EIA / TIA - 561, TX PIN 6, RX PIN 5, GND PIN 4); Infrared output (mini-jack mono 3.5mm); USB - Type B for SUBCONNECT PC Software Connection and Software Updates
Electrical certifications: CE / CB / ETL / FCC / ERP
Input voltage: 100 – 120 VAC / 220 – 240 Vac 50 / 60Hz
Consumption: Maximum 1200W, watch
Fuses: 20mm T12.5Al 250Vac
Dimensions (HXLXP) (including amplifiers, speakers and feet:) 546.3 x 505 x 512 mm
OVERVIEW
Try to remember the last time you have lived the omnipotence of thunder; Its natural presence without such a like, the experience of the low frequencies in a shock wave. With PLW215 II, we invite you to relive the intensity of mother nature in your listening room. The 38cm twin C-Cam speakers have triple suspension for a complete 4cm excursion and an individual amplification to DSP, to reproduce the lowest frequencies up to 16Hz. At this level, the bass are delivered with a powerful impact that you will feel from the head to the feet, extending the audio resolution of your speakers, including PL500 II, beyond the audible range, but with a physical dimension captivating the senses. In a word, it is the sound of nature to which we give back life.
That being said, all this explosive audio power is vain if it is not controlled. Thanks to our "subconnect" owner software, you can connect your computer to PLW215 II and adjust its response to your room. Within this calibration, the 24BITS DSP offers four customizable modes per entry, including pre-settings EQ Flat / Music / Movie / Impact. For finer calibration, you can adjust the frequency, slope and filtering EQ for each preset. A night mode is also available, to reduce the dynamics at the desired level during the animated passages. The PLW215 II is the most powerful bass box, the most sophisticated and the most natural designed by Monitor Audio, and completes the Platinum II range with impeccable precision.
TECHNOLOGY
Platinum II offers you real audiophile performances, with superb design and exceptional components. In our pursuit to even less distortion, no detail has been neglected. With meticulous FEA simulations, we optimized the electrical, mechanical, magnetic and acoustic operations, allow new discoveries at the service of our performance objectives. The Platinum II range thus deploys a new generation of medium and severe RDT speakers, and for the first time at Monitor Audio, a high frequency transducer MPD (micro pleated diaphragm). With a filter and improved terminal blocks associated with our proprietary Arc, TLE and Hiveii technologies, Platinum II takes advantage of the innovations rewarded of these last forty years to offer a high-end solution absolutely faithful to the source.
Français
Deutsch
Italiano
