Headphones & portable players

Price

• CHF29.00 - CHF3,990.00

Availability

•  In stock (19)
•  Available (69)

Brand

•  Argon Audio (1)
•  Astell&Kern (3)
•  Aune (2)
•  Bowers & Wilkins - B&W (3)
•  Bowers & wilkins - B&W (2)
•  Cambridge audio (1)
•  Dali (1)
•  Denon (2)
•  Devialet (1)
•  FiiO (30)
•  Gold Note (3)
•  iBasso (2)
•  Pro-ject (2)
•  Rotel (2)
•  Sendy Audio (1)
•  Sennheiser (4)
•  Shanling (5)
•  Sivga (2)
•  Technics (1)
•  Unison Research (1)

Color

• White (11)
• Dark Wood (6)
• Gray (21)
• Red (4)
• Blue (17)
• Green (9)
• Pink (1)
• Orange (6)
• Gold (7)
• Beige (3)
• Walnut (2)
• Light Wood (1)
• Yellow (1)
• Black (67)
• Silver (19)
• Glass (1)
• Gold and Titanium (1)
• Purple (1)
•  Pearl Blue (1)
• Light gray (1)

Headphone type

•  Closed (1)

Headphone design

•  10-mm dynamic transducer with an LCP (liquid crystal polymer) diaphragm, asymmetric internal and external magnetic circuits, and front/rear balanced pressure venting (1)
•  13.8 mm dynamic transducer with an aluminum-magnesium (magnalium) diaphragm and DLC coating, W-shaped gasket, 8.6 mm voice coil, and 1.5 T external magnet (1)
•  In-ear (1)
•  Over-ear (2)
•  Over-ear headphones (1)

Bluetooth

•  5.0 (2)
•  5.3 (4)
•  aptX HD and AAC (2)
•  Bluetooth 5.0 (1)
•  Bluetooth 5.0: SBC/AAC/LDAC reception; AAC/SBC/aptX/aptX HD/LDAC/LHDC transmission (1)
•  Bluetooth 5.1 (QCC5125): LDAC, aptX Adaptive, aptX HD, aptX LL, aptX, AAC, SBC (1)
•  Bluetooth 5.1 reception: SBC, AAC, aptX, aptX LL, aptX HD, aptX Adaptive and LDAC (1)
•  Bluetooth 5.2 (1)
•  Bluetooth 5.2 Multipoint (AAC, SBC, aptX) (1)
•  Bluetooth 5.4 (1)
•  Bluetooth 5.4 (Qualcomm QCC5181): LDAC, aptX Adaptive, aptX Lossless, aptX HD, aptX, AAC, SBC, Bluetooth LE Audio, Snapdragon Sound (1)
•  Bluetooth 5.4: LDAC, AAC, and SBC support (1)
•  Two-way Bluetooth 5.0: SBC/AAC/LDAC reception; SBC/AAC/aptX/aptX HD/LHDC/LDAC transmission (1)
•  Two-way Bluetooth 5.0: SBC/LDAC reception; SBC/aptX/aptX HD/LDAC/LHDC transmission (1)

Battery life

•  1:00 p.m. (high gain) (1)
•  3:00 p.m. (1)
•  6.5 hours (20 hours with the charging case), 15-minute fast charge for 2 hours (1)
•  10 a.m. (2)
•  30 hours (Line-Out) (1)
•  100 hours (60 hours with ANC) (1)
•  Up to 5 hours (earbuds) / 22 hours (with charging case) (1)
•  Up to 15.5 hours (low power consumption) (1)
•  up to 30 hours (2)
•  Up to 30 hours; 15-minute fast charge for 7 hours (2)

Hi-Res Audio

•  8x MQA decoding (full deployment), coaxial SPDIF and USB audio output (1)
•  18 ohm impedance, 92 dB/mW sensitivity, Hi-Res Audio certified (1)
•  32 ohm impedance, 98 dB/mW sensitivity, frequency response from 10 Hz to 40 kHz (1)
•  32 ohm impedance at 1 kHz, 105 dB/mW sensitivity, 10 Hz to 40 kHz passband, Hi-Res Audio certified (1)
•  32-ohm impedance at 1kHz, 105dB/mW sensitivity at 1kHz, frequency response from 20Hz to 40kHz, Hi-Res Audio certified (1)
•  384 kHz/32-bit, DSD256 (1)
•  384 kHz/32-bit PCM, DSD256 (1)
•  AptX Lossless (1)
•  Hi-Res Audio Certified (JAS/CEA), frequency response 20 Hz – 40 kHz (1)
•  Hi-Res Audio certified, frequency response 10 Hz – 40 kHz (1)
•  Local decoding up to 384 kHz/32-bit and native DSD256; USB audio up to 768 kHz/32-bit and DSD512, without global SRC (1)
•  Local playback up to 384 kHz/32-bit and native DSD256; USB DAC up to 768 kHz/32-bit and DSD512 (1)
•  Up to 384 kHz at 32-bit and DSD256, distortion under 0.0006 % into 32 ohms, Hi-Res Audio certified (2)
•  USB decoding up to 384 kHz/32-bit and DSD256, NOS/OS modes (384 kHz oversampling), full MQA support, signal-to-noise ratio up to 118 dB (1)
•  USB decoding up to 384 kHz/32-bit and DSD256, NOS/OS modes (384 kHz oversampling), signal-to-noise ratio up to 115 dB (1)
•  USB decoding up to 768 kHz/32-bit and native DSD512, full MQA support, signal-to-noise ratio up to 125 dB (1)
•  USB decoding up to 768 kHz/32-bit and native DSD512, full MQA support, signal-to-noise ratio up to 126 dB (1)
•  USB up to 768 kHz at 32-bit, DSD64, DSD128 and DSD256; SPDIF output up to 384 kHz (1)
•  USB up to 768 kHz at 32-bit and native DSD512, full MQA decoding, streaming up to 384 kHz at 32-bit and DSD256 (1)

Nominal impedance

•  24 ohms at 1 kHz (1)
•  32 ohms (1)
•  32 ohms at 1 kHz (1)

Sensitivity

•  109 dB/mW at 1 kHz (1)
•  112 dB/mW at 1 kHz (1)

Headphone output

•  3.5 mm (SE/SPDIF) and 4.4 mm balanced (1)
•  3.5 mm and 4.4 mm (3)
•  3.5 mm and 4.4 mm balanced headphone outputs (and 3.5 mm / 4.4 mm line outputs) (2)
•  3.5 mm and 4.4 mm balanced headphone outputs (and line outputs) (1)
•  3.5 mm single-ended headphone output (2)
•  3.5 mm single-ended output doubling as SPDIF, and 4.4 mm balanced output; impedances of 16 to 150 ohms and 16 to 300 ohms (1)
•  3.5 mm unbalanced and 4.4 mm balanced headphone outputs (1)
•  4.4 mm (symmetrical) and 6.35 mm (1)
•  6.35 mm and 3.5 mm unbalanced headphone outputs; 4.4 mm and XLR4 balanced outputs (1)
•  6.35 mm and 4.4 mm symmetrical (1)
•  6.35 mm asymmetric and 4.4 mm symmetric headphone outputs (2)
•  Balanced 4.4 mm and XLR4 outputs, plus a single-ended output; five gain levels, impedances of 8 to 150 ohms and 8 to 350 ohms (1)
•  Silver-plated oxygen-free copper cable of about 1.5 m, dual 3.5 mm plugs, 3.5 mm and 4.4 mm balanced terminations, 6.35 mm adapter (1)
•  Two cables supplied, 3.5 mm single-ended and 4.4 mm balanced, with dual 3.5 mm connectors; 6.3 mm adapter included (1)

Integrated DAC

•  32-bit ESS (1)
•  AKM AK4191 + dual AK4499EX (one per channel), XMOS XU316 USB decoding (1)
•  Cirrus Logic CS43131 converter and SGM8262 operational amplifier, immersion-gold circuit board, palladium-plated oxygen-free copper conductors (2)
•  Cirrus Logic CS43131 × 2 (1)
•  Cirrus Logic CS43198 (1)
•  Dual ES9069Q (4th-generation 32-bit HyperStream architecture), XMOS XU316 USB decoding (1)
•  ESS SABRE ES9028PRO 32-bit (1)
•  FiiO-proprietary, fully differential 24-bit R2R DAC (4 channels, 192 thin-film resistors with 0.1% tolerance), XMOS XU316 USB interface (1)
•  Four CS43198 converters (8-channel fully differential output), fully symmetrical two-stage amplification (1)
•  Proprietary 4-channel, fully differential, 24-bit R2R DAC (FiiO) (192 thin-film resistors, 0.1%, 30 ppm), SA9312L USB decoding (1)
•  Proprietary FiiO 4-channel, fully differential, 24-bit R2R DAC (192 thin-film resistors, 0.1%, 30 ppm), XMOS XU316 USB interface (1)
•  Two AKM AK4497S, X2000 controller, XU316 USB stage, class-AB amplification with discrete MJE243G and MJE253G transistors (1)
•  Two Cirrus Logic CS43198 converters, one per channel (1)
•  Two CS43198 converters and two SGM8262 operational amplifiers in a fully symmetrical configuration (1)
•  Yes (4)

RAM

•  Qualcomm Snapdragon 680 (6 nm, octa-core 2.4 GHz), Android 13, 3 GB RAM + 32 GB or 4 GB RAM + 64 GB depending on the version, microSD up to 2 TB (1)
•  Qualcomm Snapdragon 680 (6 nm octa-core), Android 13, 4 GB of RAM + 64 GB (approximately 52 GB usable), microSD up to 2 TB (1)
•  Qualcomm Snapdragon 680, Android 13, 8 GB of RAM + 128 GB (approximately 112 GB usable), microSD up to 2 TB (1)