The Epicon 6 is DALI's new reference chamber. The Epicon brings the listener closer even more of the reality that the euphonia series has so far.
Guarantee safe & secure checkout
| Series | EPICON |
|---|---|
| Frequency response (+/- 3dB) [Hz] | 35 - 30,000 |
| Sensitivity (2.83 V / 1 m) [dB] | 88.0 |
| Nominal impedance | 5 |
| Maximum SPL [dB] | 110 |
| Permissible power [W] | 50 - 300 |
| Frequency of the filter [Hz] | 700 / 2,550 / 15,000 |
| Tweeter Hybrid Module, Super High Frequency Driver, Quantity | 1 x 10 x 55 mm |
| Tweeter hybrid module, super high frequency driver, diaphragm type | Ribbon |
| Tweeter hybrid module, high frequency driver | 1 x 29 mm |
| Tweeter Hybrid Module, High Frequency Driver, Type of Diaphragm | Flexible textile dome |
| Low frequency speaker | 2 x 6½ " |
| Low Frequency Driver, Diaphragm Type | Wood fiber cone |
| Mounting type | Bass Reflex |
| Frequency Bass Reflex [Hz] | 32.5 |
| Connectivity of entries | Bi-amplification |
| Magnetic shield | No |
| Recommended positioning | Column |
| Recommended distance from the wall [cm] | > 25 |
| Max dimensions. incl. base and grid (HXLXP) [mm] | 1062 x 320x 459 |
| Dimensions of the cabinet (HXLXP) (mm) | 1025 x 232 441 |
| Weight (kg) [kg] | 30.0 |
| Accessories included | Base Manual Micro-fiber fabric Rubber blocks M10 tips Connector |
The heart of Epicon 6 is the new technology of DALI speaker. Equipped with two 6 ½ "Linear Drive Magnet Bass-medium Speakers and a Flexible Tweeter Ribbon / dome Hybrid Module, Epicon 6 redefines traditional conventions in the world of speakers. Exception.
The new DALI-designed SMC system eliminates four distortion factors in the speaker engine: eddy currents, flow variations, coil inductance and hysteresis.
Advanced Soft Magnetic Compound (SMC) system that eliminates flow variations within the magnet. This system reduces the distortion to a minimum significantly in comparison with traditional speakers.
Optimized for the Epicon range. A wide and extremely soft horizontal dispersion.
The latest generation of wood fiber cones, including a new impregnation and post-assembly protection method. The Dali Epicon speakers are not only designed but also manufactured in our Dali plant in Denmark.
Epicon 6 is the new pregnant of DALI reference. The EPICON brings the auditor closer even more of the reality than the Euphonia series so far allowed.
The heart of Epicon 6 is the new technology of DALI speaker. Equipped with two 6 ½ "Linear Drive Magnet Bass-medium Speakers and a Flexible Tweeter Ribbon / dome Hybrid Module, Epicon 6 redefines traditional conventions in the world of speakers. Exception.
2.5-Way design, Epicon 6, compared to the EPICON 2 – allows you to get below 600hz. to offer even more defined high frequencies, epicon 6 also includes a tape tweeter within the tweeter hybrid module, making it actually a 2.5 + 0.5-way chamber.
The design of magnetic systems has been a DALI specialty for many years. For the Epicon 6, we simply chose to push the limits of what was proposed in the high-end speakers until today. We set ourselves in mind to improve the magnetic system that we were going to equip the Epicon 6 in order to reduce the distortion to a level still never reached.
For this, we had to conceive a revolutionary solution: the Soft Magnetic Compound (SMC). This system offers the optimal physical properties: very high magnetic conductivity and very low electrical conductivity (about 1/10 000 of that of iron). The CMS allows an effective reduction of distortion caused by mechanical losses within the magnetic system.
The high magnetic conductivity is an important vector in the elimination of hystresis phenomenon. The non-conductive nature on the electric plane of the SMC eliminates the generated generated by the modulation of the magnetic fields and significantly reduces the eddy currents on the centerpiece, generated by the movements of the coil.
The reduction of the distortion thus obtained is easily measurable and clearly audible.
In order to provide a subtle and aerial reproduction of the high frequencies, the Epicon 6 is equipped with the Tweeter Dali hybrid module. This module consists of a 29 mm ultralight flexible dome tweeter, associated with a 10x55mm tape tweeter that allows optimal reproduction of the smallest detail covering a larger palette on the spectrum of the high Frequencies. For years, Dali has been perfecting this technology that brings you the best of these two solutions.
Low resonance frequency, high power, ability to withstand strong sound pressure without distortion, these are the qualities of our oversized dome tweeter. The ultrafin magnetic fluid allowing cooling offers a very high saturation threshold, allowing increased power and impeccable mastery of the spool of the coil, even at a high level of acoustic pressure.
The ribbon tweeter offers a vast dispersion of high frequencies and covers a large range on high frequencies. Bridling at 10 kHz, the tape ribbon comes from 15 kHz and rises far beyond 30 kHz, exceeding the limit of the frequencies audibly by the human ear.
The association of the two tweeters allows optimal control of the high frequencies, restored without resonance and without distortion. The hybrid tweeter module offers a gentle rendering and a very large horizontal dispersion that is one of the elements of the traditional Dali sound signature. Every detail counts. Thus, the façade of the module was designed to promote an optimal horizontal dispersion.
By relying on our experience and our unmatched know-how in the design of speakers, our team has fully designed and developed the loud speakers who equip the DALI Epicon 6. But above all, since 2009, we do not let it make this element if Criticism of sound restitution to anyone other than us, in our own Dali plant in Denmark.
DALI's sound philosophy is based, among other things, on the implementation of technologies to reduce mechanical losses as much as possible. In fact, we have been among the first to focus on controlling the frequency response by a meticulously balanced design of the various components of our speakers. It is the voltage and the current provided by the amplifier which must be the main factor of the sound restitution of our speakers, and not the speaker itself, which must offer the greatest possible neutrality.
The wood fiber cones have been found to be a key element for the finest, detailed and most dynamic restitution of the musical message, while ensuring a lowest loss possible information transmitted by the source. The wood fibers provide exemplary rigidity to the paper membrane and features for optimized speaker operation. The rigidity of our paper cone and wood fibers is simply exemplary.
Mounted on a low-loss rubber suspension and relaxing an extruded aluminum salad bowl, the cone can operate optimally, without any constraint. The assembly of the different loudspeaker components is done using extremely precise tools to ensure perfect alignment.
Meticulous attention has been paid to the CNC machining of the frontal baffle with a view to offering more space between the 7 screws and thus guaranteeing an unhindered air flow behind the speakers. This detail participates in a so-called "low loss" design and our permanent timing attention. Each face of the Epicon 6 consists of 6 individual thicknesses of MDF, pasted together, which eliminate the stationary waves, thus improving the level of detail and the transparency. A spine in MDF of a thickness of 53 mm ensures optimum rigidity of the box
With a total thickness of 33mm, the frontal baffle is totally inert and guarantees optimum energy transmission emitted by the speakers in acoustic energy. The curve baffle is also an important factor in ensuring the integrity and efficiency of the cabinet.
Inside, Epicon 6 is divided into two bedrooms identical for low loud speakers and has another separate bedroom for the medium speaker. The bass speaker chambers optimize the setting of the box identically but at the same time completely independent for each speaker. The chamber of the medium speaker allows the reproduction of critical frequencies such as those of the human voice without any interference with the rest of the system.
You will discover two bass ports at the convex ends at the back of the box, positioned as close as possible of the high loudspeakers to minimize the turbulence. At the bottom of the enclosure, you will find the connection terminal mounted in its own slot, isolated from the dynamic variations of the pressure inside the Bass Reflex rooms.
Install comfortably. Get ready to discover a sound reproduction of voices and high frequencies so close to the reality that you will feel like you're at the very heart of the concert hall.
Data sheet
Specific References
The Epicon Stand speaker support has been specially designed to accommodate Epicon 2 and the Epicon Vokal Central Speaker.
Français
Deutsch
Italiano
